can this work with any on the 4layertech boards

[rusuki]

i have this pms board here idk wha type butjust wondering if i wasted my money on this

 

[ohkin86]

I sold it, and of course it works, every one has been tested by me.

 

[rusuki]

ok wasnt judging u just wondering

 

[rusuki]

i was acctually wondering if it works with the modern $ layer boards

 

[rusuki]

4

i was acctually wondering if it works with the modern $ layer boards

4 layer

 

[ohkin86]

ok wasnt judging u just wondering

I understand, I didn't feel any malice. If you need help, you can send me a private message. I don't know which order is yours. My second language is Japanese, and I can communicate without barriers. I'm not good at English.

 

[Stitches]

i was acctually wondering if it works with the modern $ layer boards

It does not. Ohkin's boards are reproductions of the old opensourced 1.0 version of the PMS. The current 4layertech 2.X designs use different parts and a different protocol. They are not inter-compatible in any arrangement AFAIK. Also worth noting, that 1.0 PMS does not have reverse polarity protection. If you wire your cells in backwards, it will kill the PMS.

Be sure to double check everything before connecting the cells.

 

[rusuki]

It does not. Ohkin's boards are reproductions of the old opensourced 1.0 version of the PMS. The current 4layertech 2.X designs use different parts and a different protocol. They are not inter-compatible in any arrangement AFAIK. Also worth noting, that 1.0 PMS does not have reverse polarity protection. If you wire your cells in backwards, it will kill the PMS.

Be sure to double check everything before connecting the cells.

this makes it harder now

 

[rusuki]

this makes it harder now

the new pms 2 and lite are already expensive as is but im not giving up easily WILL find a way
I've already spent so much money on this

 

[rusuki]

different parts and a different protocol

What are so different about the protocols i have the Dustin pcbs for the gc+ and rvl amp
so theoretically it should work with the pms 1.0

 

[Stitches]

What are so different about the protocols i have the Dustin pcbs for the gc+ and rvl amp
so theoretically it should work with the pms 1.0

Sorry, I should have been more specific. The GC+ and AMP boards will work fine, it's the current generation PMS and PD modules specifically that are not compatible with each other across generations. You can't use a PD2 or PD3 with the 1.0 PMS, and can't use the old 1.0 PD module with a current generation PMS or PMSLite.

 

[rusuki]

ooooooh ok that makes more sense