Solved RGB difficulty with Wii VGA

[EvilBaconPie]

I've been having difficulties with the RGB connections for my G-Wii's VGA. As it stands, my display looks like this:

Here are the approximate resistances to GND for all 3 (both on the Wii and the screen board):
R: 37.5
G: 75
B: 75
Based on what I've read, I think that means the G and B connections both need work. Is that correct?
Here's what they look like right now:

Is there anything else I could be missing, or do I just need better solder joints on G and B (or possibly their ground lines)?

 

[Customledmods]

might have wires mixed up

https://bitbuilt.net/forums/index.php?threads/gwii-green-tint-on-lcd.4801/

 

[EvilBaconPie]

I didn't think so, but I'll give it a shot next time I get the chance. Thanks for the help!

 

[Stitches]

If the wiring is correct, you probably need to adjust the colour balance on the screen. Sometimes they need some tweaking

 

[EvilBaconPie]

I just went back, and the wiring was correct, but after messing with the settings enough, I think I'm satisfied with what I've got. Strangely enough, I've tried this before, but the result came out better this time, so I'm keeping it. Thanks for the tip!

 

[Stitches]

Nice. I don't know why that happens sometimes, but I've had a few screens where I had to lower the colour intensity for all three channels to 50% to get it to look correct