Hello,
I'm at the end of step 13 in the guide (Testing the trim) and having an issue with the screen. When I boot the unit on, the screen lights up for half a second then shuts off. When I hook up the controller board to the screen and press the source button, I get another (even shorter) flicker of light and the screen shuts off again. I checked all the voltage lines are reading correctly and confirmed the screen is grounded common with the other boards.
I have no reason to believe U10 is bad and I followed this guide exactly: https://bitbuilt.net/images/guide_hub/console_modding/wii/ss_definitive_wii/u10_u5.png
Confirmed 3x over and all connections tested.
In another post I made (https://bitbuilt.net/forums/index.php?threads/g-boy-rev-3-board-trim-too-deep.4972/) I had trimmed a little too deep on one side of the board and cut through the NAND traces, I have since repaired those and confirmed continuity/no shorts. I'm not positive there isn't anything I missed there though so thought it was worth pointing out.
Any thoughts/ideas on what could be wrong would be appreciated.
I'm at the end of step 13 in the guide (Testing the trim) and having an issue with the screen. When I boot the unit on, the screen lights up for half a second then shuts off. When I hook up the controller board to the screen and press the source button, I get another (even shorter) flicker of light and the screen shuts off again. I checked all the voltage lines are reading correctly and confirmed the screen is grounded common with the other boards.
I have no reason to believe U10 is bad and I followed this guide exactly: https://bitbuilt.net/images/guide_hub/console_modding/wii/ss_definitive_wii/u10_u5.png
Confirmed 3x over and all connections tested.
In another post I made (https://bitbuilt.net/forums/index.php?threads/g-boy-rev-3-board-trim-too-deep.4972/) I had trimmed a little too deep on one side of the board and cut through the NAND traces, I have since repaired those and confirmed continuity/no shorts. I'm not positive there isn't anything I missed there though so thought it was worth pointing out.
Any thoughts/ideas on what could be wrong would be appreciated.
Attachments
-
1 MB Views: 101
-
1 MB Views: 93
-
880 KB Views: 101
-
847.7 KB Views: 97
-
988.9 KB Views: 102
-
1,021.5 KB Views: 98
-
975.2 KB Views: 95