- Joined
- Jan 17, 2020
- Messages
- 22
- Likes
- 7
- Portables
- Gamecube has a handle, right?
I don't believe the GameCube controller through the Wii U gamecube adaptor fully works in BBLoader.
You'll need to plug it into the ports built into the Wii.
If you have a family Wii, (no GCc ports,) to be able to use a GCc to navigate before making the GBoy, you'll need to either wire the controller directly to the pins on the motherboard, or salvage some GCc ports from somewhere else.
But, as long as the WiiMote is working, the software is fully working, and you can start the trim. The GC controller emulator (the GC+2.0) will get wired to a place that is present on every type of Wii, so your GC+ will be able to work no matter what.
You'll need to plug it into the ports built into the Wii.
If you have a family Wii, (no GCc ports,) to be able to use a GCc to navigate before making the GBoy, you'll need to either wire the controller directly to the pins on the motherboard, or salvage some GCc ports from somewhere else.
But, as long as the WiiMote is working, the software is fully working, and you can start the trim. The GC controller emulator (the GC+2.0) will get wired to a place that is present on every type of Wii, so your GC+ will be able to work no matter what.