[US] TinyTendo Cartridge Boards

[Pears]

Hi Everyone,

I have a bunch of TinyTendo cartridge boards and would like to offer them up for sale if anyone is interested. I ordered a good number of each type in order to drop the per board cost. All boards were produced by PCBway with immersion gold and 45 degree cart edge bevels.

TinyTendo Project: https://github.com/Redherring32/TinyTendo

I currently have the following amounts of each board available:

• NROM ($1.15 each): 35
• SKROM ($2.25 each): 15
• TKROM ($2.25 each): 6
• DISCRETE ($1.50 each): 25

The cost is per board above + shipping, ground advantage is probably the cheapest.

 

[Hili]

Did you create that TNY-SKROM PCB yourself?

 

[Pears]

Did you create that TNY-SKROM PCB yourself?

Yes I made the TNY-SKROM with inspiration from your TNY-SEROM board and BucketMouse's SxROM board

The complete KiCad project and gerber release is available here: https://github.com/Pearus/TNY-SKROM

 

[loopj]

Pears you are insane, so much stealth cool shit you are working on.

 

[Pears]

Added some TNY-DISCRETE boards for sale too. Just a note that I accidentally dropped a digit (.9mm) when calculating the location of the hole for the screw post in a rush to order before tariffs, so these are a tight fit with some friction, but they do fit in the stock TinyTendo cart shell, at least shells I've printed. Additionally the silkscreen text got misaligned on the right-most jumper due to moving it last minute. Both of these have been fixed in the official release though: https://github.com/Pearus/TNY-DISCRETE