Question Random Questions

[atkfromabove]

I've had a few questions after building a couple of portables that I haven't found exact answers to and wanted to ask them all here.

1. What are all the RVLoader button combos? I've seen a few posts with people referencing things like battery percentage, volume, and OSD control.

2. How can I enter the original wii menu?

3. Where can I find the firmware for PMS and UAMP? I've found the GC+ 2 firmware but cannot find the others.

4. RVLoader doesn't always boot, I have to try 3 or 4 times sometimes before I'll get a full post. Is this a common problem? I have the issue on both of the portables I've made so far.

 

[a red box]

1. For changing volume with a gc controller, you press z+y+up or down on the d pad. To see your battery percentage when in a game, you can press z+x/y+up on the d pad(I’m pretty sure you’ll get both the volume change icon and battery percentage if you use the combination with the y button instead of x). I haven’t really used these a lot so there is probably something that’s incorrect/missing. Navigating the OSD for the screen was somewhat figured out from this thread
https://bitbuilt.net/forums/index.php?threads/portable-wii-problems.5793/#post-61738. There have also been other somewhat recent threads that explore changing the source and what all the keys/pads do.

2. You can enter the original wii menu by going to the home icon in Rvloader. This will only work if Bluetooth has been relocated though.

3. The firmware should be in the firmware tab under the selected product in 4layertech.

4. I’m guessing inconsistent boots are probably an issue with the usb drive/usb lines, but I’m not fully sure.