rvl pms

Hello all, I am currently building an n64 portable using the rvl pms 2. However every time I try to power it on it turns on for a second then right back off. I wired up batteries to positive and negative and the usb c to charge and ground. Lastly I wired the power switch to the power button...

Me and a fellow modder are working on a custom mini GameCube Console build kinda similar to the GameCube Nano and Micro but with a slightly bigger case to fit a regular OMGWTF Trimmed Wii and other basic custom PCBs. The goal is to make it the least difficult and open source build for beginners...

Hey guys! I recently killed the PIC18F26K42 IC on my RVL-PMS 2 and recently got a new one, I soldered it, and hooked it up to a PICkit3, I was able to detect it and everything was working, now I just need a firmware to flash, I heard a few things like: "The bootloader is a separate piece of...

The RVL-PMS-2 just restocked on 4layertech, but before that I was just going to go with the RVL-PMS-Lite, I don't care about perfect battery life indication and the one with voltage is fine for me on the Lite version. The only other thing is the LDO on the Wii would be used instead; how...

Does anybody Know when the PMS lite will be in stock? I wanted to start building my first portable, but then it went out of stock.

Hey all Basic here, BB PMS I just completed repairing one out of 2 fried pms 2's which were provided to me by PiR8_BTY#9418 over at the 4 layer tech discord server With this pms repaired I thought that I should help out a modder in need of a pms for their next project build hence why I am...

(just want to preface this with the fact that I am on my way to a movie so I will update this post with pictures in a few hours) I have a PMS 2 and I can wire a battery up and I can get stuff like F+ to get 5.1v and the pms starts to get warm but except for one time in the hours I tried, there...

I recently bought the RVL PMS 2 because I managed to ruin my PMS 1. I'm using the old USB-C PD because I already had it and heard that they should work together. However, some of the connection names differ between the two versions, so I want to make sure I know what I should be connecting to...

I've been in the beginning stages of actually putting together a G-Wii for a couple months now. I couldn't get fan spin, and I think I likely messed up my PMS (there was a spark at one point and I think I may have shorted something with an accidental solder drip), and to add to that, I managed...

Is their a thread or tutorial on how to put the pms together, and how to program the chips on it?

When I was working on my g-boy I might have accidentally shorted something and when I hook up the battery, take my black multimeter probe and put it on a ground pad, and the red probe on a voltage pad, nothing shows up. And when I put one on the positive of the battery and the other on a voltage...

I have reached the stage where I test the usb-pcb and the rvl-pms but it won’t boot up, I’m worried I broke the rule pms cuz when the battery is in I set my multimeter to voltage and put one end on the positive connection to the battery a and the other end on a 1v pad but it reads 3.3 volts and...

Hi, I’m am going to build my first Wii portable but I can’t find some parts: -USB C PD PCB -RVL Power Management System -RVL LCD Direct Drive Those parts are currently unavailable on the store, and I don’t know when there will be a restock If anybody have those, answer me