omgwtf

I'm currently taking on my first Ashida Build and I've encountered an issue during post-trimming testing, I can't seem to get a video out signal. Currently using a repurposed 18650 from a M12 Milwaukee battery, voltage is 4.022v. All the resistances were good and no shorts were present. I've...

Hey there, I’ve been working on an Ashida and recently trimmed my motherboard and have been having issues getting it to start. Currently, when I try to start the Wii, I feel it getting warm but when I tested it with my multimeter while the Wii was powered on, I was not getting any current from...

Hello! Can anyone give me some more things to try in regards to a few shorts I found? I have a short to ground on the 1.15V line (Continuity mode; One probe on ground screwpost, another on the 1.15V point mentioned here; and I'm getting a beep). This makes some sense because it is fairly close...

Hello, I swear I've seen people pull these off of their board trims before but I want to be 100% sure before doing it. Can I remove all the things inside my pretty purple box?

Hello, I've found this website to be very interesting and I enjoy all the ideas and ingenuity, so I decided to post a worklog of my Ashida build to share yet another build and, of course, have the ability to ask questions and get advice from the more experienced people here. I first saw the...

I designed this template to take away any of the uncertainty when trimming the Wii Motherboard. This makes sure the cut lines for a Wii are in the exact same place every single time, and it ensures the trimmed Wii matches the shape in the CAD software so it makes designing things more exact...

I have found the Compendium, as well as the many guides here on BitBuilt, to be indispensable tools. However, sometimes, especially when I first started, it is somewhat difficult to see how everything fits together, and how to do some of the stuff you may want to do. In response to this, I have...

I started my Portable Wii project about a year ago and managed to do the OMGWTF-trim successfully, but I never finished the project. Now I was thinking of reviving the project and today on the bus, I got to think , if it could be possible to design a custom motherboard and transplant the...

Hello all, After crawling through these forums researching other member's builds and best practices, I plan on building a portable Wii, primarily for GameCube purposes. As an avid video game and horror fan, my all-time favorite game series is Resident Evil and my best memories playing those...

The discord addicted should already have seen a lot of those pics, but i wanted to share them for all ppl on BB :) Also i think it's the best i can do for celebrating my one-hundreds post in this community! Warning: Some of the shown mods are still in a Proof-Of-Concept, so don't try this at...

Hello there. I registered just a moment ago. So, I bought a Wii to try OMGWTF on and will most likely turn it into a portable and some kind of dock with GC ports and stuff. Main goal here is ability to play GC games, but I'm planning to keep BT and wifi. Progress so far consists of a succesful...