Search results

First you have to delicatly scratch the via to expose the copper,and then you can add your wire with a little bit of solder at the end and finally use some solder flux(this one helps a lot )

Ohh okay didn't understand that lol :XD:

Don't worry,it's a very common error,everybody have it.You just need to solder in a better way your two data lines and keep them as short as possible.By the way,if you can send pictures of your soldering that will be very helpfull :)

Yeah it's pretty large,I didn't made one but here is the link lf the buttons. https://flashfi.re/products/tmhf07-dual-action-tact-switch And also,be careful,the bom is old and you need to check others things,I highly recommend you to check this thread where @CrazyGadget put links for all the...

Well,actually,it was that I have done pretty bad solders to my connectors and also that I burned the flex part of the joysticks :XD:

Yeah finally it's finish :XD: ,blue looks defintly good and yes,it's looks pretty crazy to have colored consoles lol. Yep,hall effect joystick so no drift (I hope )

Hey yo all,back from the dead :) It's been a long and hard road to finish this thing and I can officially says that it's finally over :D! And dang I love this thing>:),I'm so happy that I can play my on my portable wii after 2 years of strugling,itmay nothave the best screen,it may just have a...

Yes,the case was made for 4layertech's board,so it's definitly compatible with the gc+2,the pms2/lite,the pms-pd 3 and the uamp Edit: But actually,if you want to build something similar,with less wires(actually none lol) and more modern,I would recommend you to check @Xenii Xii boy ultr,and,if...

Yep that's it

I recommend you to use the case from @flux_sniffer,I personnaly used it for mine and I really love it,especially the litte interruptor on the top of the console.The files are on the third page of this thread :)

Oh ok,that's will be good in that case.Well,for the resistance I don't really,I usually wire it anyway,and for the metal plate you can just put some soldier on the top of the 1.8v print,wait some Time and then you will feel that you can get it off,almost by itself,just as in butter :)

Nah, your wii looks good on the trimming part but you forgot to relocate the u10. Here is how you Can Do And also,for the future,I recommend you to get off the metal plate of the 1.8v regulator,I think it will help the future wiring.

Oh ok,get it, and yeah no problem:) By the way you can also check on bitbuilt's discord server,sometimes it helps a bit.

Yeah, that was what I meant(sorry lol),and I advice you to check on the selling part of bitbuilt who already done some in the past,it's easier to find somebody that can make one for you :)

Not sure I'm not sure @Nicholas298 is doing commissions,but if I remember well,@CrazyGadget and @Crazzyleprechaun have done some in the past(not trying to take somebdy job by the way :XD: )

Yeah,don't worry for that,I passed so much time strugling with my g-boy that I just want to help anybody who's trying the same now :)

Hello,I saw that you want to try a g-boy and I have some experience with it,so if you need anything,feel free to send a message ;) and if you need(if you're in Europe especially),I can send you some boards and components if you need :).By the way,I should have a spare wii if you need one

Hey again all,I have done a pretty bad solder on my last GC+ gboy board on the joystick connectors,and now I need a joystick breakout board.Is anybody in Europe(in france will be the best lol)have a breakout board that they don't need for a reasonable price? Have a good day everybody ;)...

Hello all,does anyone,in Europe(in france would be the best) have a replacement rvl-ntc to salle?I just lost mine :blush:.Have a good day everyone :)

Hey all,I started long time ago a game boy zero that I actually never finished and I will be happy to sell it(to buy a GPI case).I really wat to sell it around 50-60€,but I can still sell it for a little bit more.Keep in mind that the project has not been tested for over a year and a half.By the...