Search results

First of all, 20v is out of spec for the RVL PSU. Specifications: Vin (Min): 5V Vin (Max): 17V Second, the 5v regulator may be busted. I've had an RVL PSU in the past have multiple dud regulators. [EDIT] I can see your issue, you've not bridged the pads for the 5v reg to enable it.

Sega Saturn Controller Scan Contains: Sega Saturn Controller Top Sega Saturn Controller Bottom Sega Saturn Controller Trigger Specs: These are high poly scans, average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit certain parts of...

This is free and unencumbered software released into the public domain. Anyone is free to copy, modify, publish, use, compile, sell, or distribute this software, either in source code form or as a compiled binary, for any purpose, commercial or non-commercial, and by any means. In...

You likely have tolerance issues with your printer, I'd suggest printing it in the correct orientation and see if that helps.

Have you removed the supports neat the screen mount latches?. You may need to provide a picture of the issue.

Just for future reference, the models are available on the 4layer website: https://4layertech.com/pages/downloads

Wiimote Nunchuck Scan Contains: Wii Nunchuck Top Wii Nunchuck Bottom Wii Nunchuck Button Mount Wii Nunchuck C Button Wii Nunchuck Z Button Specs: These are high poly scans, average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit...

You've ripped up all the pads.

A quick update: I'm currently working on improvements to the design by adding features such as a switch to enable/disable the SD card slot so to allow the 2nd memory card port to be functional again, and to have an optional shell that incorporates a rotatable PS2 logo. I'm also renaming the...

It's designed for direct screwing into the case, FDM prints can take a considerable amount of screwing/unscrewing before failure. Resin prints aren't as forgiving but plenty of others have built the Ashida without threaded inserts.

PLEASE READ THE FIRST POST THOROUGHLY

This is something you'll need to tackle yourself.

The stock sensor bar requires 12v which the Ashida doesn't have. You'd need to make a custom LED bar that runs off 5v. There is room for a HDMI port above the LCD on the front of the case.

Updated OP to only include the front parts. Rear half of the case should be downloaded from the official G-Wii thread as it gets updated.

That or use Coaxial/WiFi antenna wire.

Use shielded wire.

Hell no.

The rumble lines are not connected to anything on the Ashida boards. I believe all you need to do is bridge the 3.3v pad with the MP pad and wire your rumble device to M+ and M-.