Search results

Hello, what I want to say is that you can see the pictures you added. All of them are folders. You need to press OK to enter and select the program with ELF suffix you need to run. For example, opnps2ld ELF

Remove the 8.4v wiring at 7805mg and try to test whether there is 3.4V voltage at the starting point,

Thank you for your work. Could you scan the key holder?

Yes, it's an injection moulded ABS frosted case.

Yes, 9000x series can be used with two 18650 batteries. In my experience, it can run for about 1.5 hours. I made many PS2 protable with wiiu shell,

WOW! Thank you for your work. That's what I want

Hello, friend. This is made by myself. Usually, you only need to connect these lines to display them. You can refer to it. The reason why they are not displayed may also be the cause of the line. If some lines are disconnected, you'd better use a multimeter to measure which line is...

ps2 to hdmi

Hello, you are connected. If it doesn't work, please check whether the line is connected. It is possible that the connection line is not easy to use. If you do not connect the analog rocker, the direction may be disorderly after starting up. If you press the D pad, there will be no response...

Hi, I like your build, your buttons, I hope you can improve some, I give you some, I hope it can help you. The added attachment is DXF format, which can be easily switched to PCB.

Hello, if you are a beginner, CMB is not necessarily necessary. In my experience, 2 18650 batteries, directly connected to the motherboard, can work as well. As for the video output VGA, I have tried it, but it is not simple. You can try the HDMI adapter. It is very cheap. Although it will...

OK, actually, the controller is under the motherboard. The diagram you see is not finished. There are many lines. I didn't take pictures. The controller IC I used is very small. It can be customized in China, but it needs a minimum order of 2-3000. Please see this picture

Hello everyone, I haven't released the PS2 I made. I've made a lot of them, most of them use wiiu shell. This time, this machine uses 70006 motherboard. I know it's very big, but not everyone owns a 7900x machine. In fact, 7W machine is also feasible, but its power consumption is relatively...

Hi, I understand what you're saying. Many people want to play Xbox in their hands, but its motherboard is too big, and there is no way to solve the problem of heat dissipation. If you want to play at home, there is a way to use wireless transmission of video and sound, and integrate the handle...

I have this shell. I believe I can finish it in the next few days

Thank you for your reply。 When I was in normal use on Electrified state , I pulled out the controller, then it turned off, and then it didn't start.

Because I don't have 7900x， ps2 90006 using MARS816HD chips can wark softmod，is same。 My second PS2 portable , expected to use 79002，thanks You know, you can cut off the wiiu buttons and the PS2 buttons，And then paste them again， Wiiu pad hole, can be expanded using a bit。Doing this makes it...

My ps2 is 79002 ，When my PS2 turned on, the green light turned on, and it turned red in 1 seconds. Why? Who knows What's wrong it is?The problem of the motherboard？How to fix it？

Hello,Is it done? can you upload some latest photos of your psu portable?

Well, guys, I use the case bought from Alibaba to make my PS2 portable. I use 90006 motherboards and 6.5 inch LCD. Use 2 section 18650 Panasonic 3.7V battery. It takes about 1.5 hours. This is the first time I do the handover, and its the AV output used. Next time I'm ready to use HDMI.