Search results

yes it's quite strange it happened the same

you could also do the reverse test by trying the board you had with another AV device without buying a new one

I noticed that unfortunately it happens when the batteries are almost at 0% probably the voltage reaches critical levels and the controller no longer works correctly... when I can I have a good gaming session but they definitely seem far superior!

it is on the ACC line and not AV, also you would not be able to solder the connector in its seat flush with the board, also it is not necessary for your problem, if you have another AV device you can confirm that the screen is working correctly

hello guys, small update after a few months. one of the two analogs died with dignity (lol) since as if on purpose I'm playing starfox adventure... there is a specific level where you have to keep the cursor inside the green bar with the left analog... with the current analog of the previous...

from the first photo you can see you have more short tracks

I've already seen this scene cit

It seemed that creating it without wires was cleaner to assemble and in terms of operation, you had many problems fortunately you managed to solve them! Great project for sure!

no problem, buy with peace of mind

thx for u reply ,actually from my side it doesn't seem like a big problem not being able to configure the gcvideo, but it's interesting to know that it could be done in the future with a new fw (I had misunderstood the gamecube dualshock - wii mote issue)

difficult to establish, it depends on the case, fans and heat sinks used. You should do some tests if you already have something yours so you can understand whether to use it or not, a thermometer with a probe could also be useful to understand what temperatures the console reaches in game after...

uh bad story at this point only Aurelio can save us, or we should try the 2.4v but I don't think it unlocks this function...

yes I meant with the GC+2.0, so with a normal wii and a "normal" dualshock gamecube and the fw "gcvideo-dvi-shuriken-v3-wii-3.1-spirom-complete.bin" does it work? because I understood that this fw accepts commands from the wii motion and not from the gamecube port, if so it means that the...

I also used ch134a with neoprogrammer which worked perfectly, the fw for the wii version should be modified so that it works with the gamecube controller commands nop u need the 5v for a picture ,to give you an idea, I can't tell you about the power, a fast test gave me about 7 minutes less...

I remember for sure that the cell balancing was non-existent (beyond specifications) and it also got too hot if I'm not mistaken

I have some cheap DIY power bank circuits I can do some tests, but I would only use it as 5v + lithium charging, then with regulators connected directly to the lithium generate the remaining voltages , obviously lithium batteries must have an over-discharge protection circuit.

that pcb is rubbish tried some time ago,you can simply buy a DIY powerbank circuit with USB C still on aliexpress

hi guys here are the two and (I think) latest updates from yesterday and today: yesterday I started with the controller board swap with the new xenii designer (installed on his V3) Currently I haven't tried it thoroughly compared to the old one (over 30 hours of use and using it the keys...

hi super I used a very thin fabric (when backlit you can see through it like the fabric of a mosquito net), for the HDMI I wanted to try the AVE HDMI, an HDMI output would be impossible at least via standard HDMI, it could be done via USB C but it would require too much work and the space inside...

small update, the buttons replaced by aliexpress.... they really suck, they wore out after not even 30 hours of use: I found an nds lite as cheap as possible but grey... actually it's not very noticeable and I also like the contrast between the 3 colours, I was opting for other colors but I...