Search results

The BS2 is complete ! I upload the Youtube video of the construction on my YouTube channel at 18h30 (Paris), 12:10 (Washington). (I have uploaded the English subtitles) I think until now I have passed the challenge of creating the thinnest portable ps2 in the world ! It is only 22 mm thick ...

After testing some other games it work only with Kingdom Hearts, Crash mind over mutant, GTA San Andreas. I have tested God of war in fench first and in english after, but I have the same problem : the controller is not detected. And when I test the controller with the Controller tester (in...

The microSD-to-USB Converter look very tiny ! The prices are correct but, unfortunately I am in France and the last time I placed an order in the USA I paid 50% tax ...

Can't wait to see another version :D For the BT for audio I plan to use it too I think it can bee really nice ! I did not know that there were circuits which allowed to switch an analog signal, very good to know, I think surely to use some and make a complete PCB with a bluetooth module, that...

Have you tested if you have short ? Resistance between each point of Voltage /GND ? Your solder on the U10 look messy, maybe the problem come from here ?

Ok, after a lot of testing ... strugle ... MAJ OPL and FMCB... install all again ... testing some diferents types of games (EU, USA, FR). It look like it don't recognize the controller only when I put game in FR (French), If I put EUR rom in english it work ! I don't know why ? Maybe OPL...

I have tested with 2 - 3 games and I have the same problem, my controller are not recognized. The controller is recognized only with gta san andreas ! I don't know why ? It is wired on the port 1 not on the 2.

I have good news, the sticks work great NOW ! I have tested to found the good value step by step (modifying, upload, test, wait ... loop ...). And here is my values that work great : And to invert the direction I have added a tild here and it work : And here is the RGB LED : Pretty nice in...

Thanks @Emetsys , but I don't know how to get debug value with the pickit ? The value range are 0 - 255 I checked a second time the voltage values that the joysticks return and it was good. Her is the result with the value : So I modified the range a little because when I go to the end stop on...

Here is my first problem that I had with the joysticks : A simple short between L/R and GND on both joystick FFC connector ! Some measurements on the test pads allowed me to find quickly enough, always add test pads on your PCBs ! Thank you very much @Gman for your help in guiding me in the...

I realized one thing, green is ugly ! It was probably because I'm lazy to paint that I wanted to leave in green. Everyone makes mistakes, so I bought a protective mask and painted everything white ! I completely covered the bottom part with masking tape because that was already mounted, Here's...

Hello guys, good news I have received my PCBs ! I think they are very beautiful in white ! I had a small problem with the buttons, the buttons of the directional cross have a gap of 13cm and I put 15, so to repair this error without ordering again PCBs I moved the buttons and used small...

In the past day I tested if the memory card and the controller were well connected. And they weren't ! So I took the motherboard apart, and it was just a wire on each thing that was soldered in the wrong place, after having this modification and reassembled, the controller and the memory card...

After some test print, I'm back with this : The print of the night ... (I hate my bed, it is not flat, and I have tried to add a sheet of paper and here is the result :/ ) Fortunately the second try was the good ! I have chosen to keep the original color, because I don't want it black or...

@The Salty Memes Thank you !!! @Ollie For the vita button YES, if it can help other person of course I would share them, for the moment I need to test it more for that I need to receive the PCBs It is tomorrow and this is what the end result should look like : I don't know how much is the...

Good evening, or good morning, as promised here is the rest of the advancement ! Test print Time : After about 1 billion test prints my PS vita buttons fit pretty well, I had struggle a lot with them :XD: After that I printed some tests for the part with the kingston adapter and the PD...

Hello guys ! I made a lot of progress on my portable PS2, and also made some mistakes ... First I finished the PCBs and this is what they look like : @Stitches I still put the signal tracks of the same lenght, I saw that it was easy to do, at least I'm sure not to have any problems. However...

Pretty nice, congrat So finally what was the problem ?

Hello, I have ordered the PCB on JLCPCB and place all the component by hand. The advancement of the Portable PS2 : I am designing pcbs for buttons and joysticks, but I have a question : Is the length of the signal tracks of the "controller" is important or need to be same ? Because on my PCB...

Yes great idea to check the capacitors. Check if you've great sanded the edges too (maybe that, you never know).