Search results

Forcing progressive work, thank you very much @Aurelio I have another problem it is with the U-Amp, at times random it starts to make strange "Skrrzzzrrkkrk" and continuous. And when I restart it works again, I until he remakes the weird noise O.o

Hello, I have some problems o.O My VGA screen says "out of range" when I run a GC game on my O-Wii. The screen is wired in VGA mode, when it was still in comoposite it works fine with gamecube games Only Wii games work well with VGA This is very strange because the resolution of Gamecube Games...

Ah I didn't know it was 240p, maybe my screen doesn't support it but I still find it weird it supports 480p well. Macbook speaker sound with U-amp is super clean, I think it's much better than nintendo ds speakers or other small speakers ! EDIT : It work when I set to YES "Force Progressive"

Thank you for your nice comments @Gman @Noah @Al3x Portugal :) This is my first build but I don't think it will be the last (it's addictive) ;) I think I will try to make several O-Wii, I will of course review the few errors and I might sell some if there are people who might be interested. I...

As promised here are pictures of the inside finished : And after long months of research, learning, development and design Let me introduce you to the O-wii : The Features : - WII PMS, U-Amp, GC + 2.0, and of course a Wii - 7 Inch VGA screen - 12 000 mAh of capacity (NCR18650B) - NDS lite...

After the first tests I realized that a lot of things were wrong : The first mistake (I expected) is that the custom PCB for the nintendo ds buttons does not work well, you have to press the button very hard to detect the pressure. This is because the last top coat on the PCB is HASL, the...

6 - Assembly and first tests : For the assembly, I started with the upper part by placing the screen then I double-sided tape the screen card on back of it. I fixed the screen with the printed part which retains the GC+ 2.0 and the wire channels. After that I put in place the NDS lite buttons...

Ah ok I understand better :D Now that vga is more common, would it be a good idea to change the colors for it or put a disclaimer to prevent other people from getting it wrong ?

Yes, thank you @Aurelio :D The pictures in the guide with the colored tracks are confusing since they are not the corresponding colors O.o Now it work fine : I am impressed with the notable difference between RCA and VGA :D This is really a big improvement, thank you very much for allowing...

Yeah it work ! Woow the VGA its very clean Thank you so much @waldie It work ... but the colors are strange : I inverted the green and the red :facepalm:

Ahhhh :facepalm: I understand, I need to put 3.3V on Via8 (Mode) to make it work ! I had misunderstood, I thought you said that I had to take the 3.3V from here and connect it to my screen card :facepalm: I also thought that this pin was already connected to 3.3V O.o Thank you very much...

Thanks for you help, 3.3V is directly connected to my trimmed screen board on my portable with my trimmed Wii, the RCA work but not the VGA. On my second test with the Untrimmed wii the screen board is the same but it is not trimed and powered by external 5V, of course I have connected the GND...

Hi all, I really need some help i dont understand why the VGA patch is not working for me :rothink: I have plan to use VGA on my O-Wii, but after installing BBloader and activate the VGA nothing apears O.o I have tried many times to make it work, I have checked my connections several times, the...

5 - Screen board modification : I didn't say it above, the screen I will be using is a 7 inch screen which comes with a card supporting RCA, HDMI and of course VGA :) The card that goes with this screen has a lot of thick components and is also quite wide. To be able to use it I first removed...

Thank you for your encouraging comments :) @Quakers @Lettuce For the bottom part of my case the printing at the level of the tray was not very clean :\ I regret my old printer glass bed, before I had made an RepRap Itopie, now I have a prusa i3 MK3s clone that I made using my first printer...

Hello everyone, I am back after some time away I have made good progress in terms of the case, I did several tests and some modifications in my design : I had to make a lot more adjustment for the top part because of the buttons. And after all these test impressions and modifications here is...

Thanks @GingerOfOz , Waluigi is the best :) 4 - 3D Printing and adjustment : That's good i'm just trying experimenting with the impression of this piece I have tested to print the part with PrusaSlicer first, It is not very bad but not perfect (falling bridge), I have tested with Simplify 3d...

3 - CAO Time : Usually I use Solidworks but this time I use Fusion 360 because of the custom NDS lite pad PCBs I made in Eagle, the synchronization between Eagle and fusion makes the project scalable if the PCB is not good I can edit it in Eagle and the change is done automatically. It is a...

I have no problem importing into fusion 360, it works fine. I said that because I like to use the parts as a reference for measurements and references in my designs, it makes it easier to modify the design later, especially for designs with a lot of parts. Thanks for the link

Hello Wesk, do you have the SLDPRT, SLDASM or Fusion 360 piece files ? The .obj is a mesh so it is difficult to use in a modelization. If you want, I did the modeling of the OMGWTF Wii trim, but I'm not sure about the hole distances: /