Search results

PAL cube?

I have. I get to a screen with a usb option of some sort and pressing down on dpad of reset brings me to HBC Edit: Got it to work. Thanks

How do I autoboot to postloader then?

PAL Cpu 40 No mods Complete format Portabalize Mii no wifi pack installed but upside down HB channel. please help

Glad I could help! If we could also find the IDE pins on this motherfucker?! Dear God...

@Gman Red IC leg 1 = 1.783v resistance between Red IC leg 1 and GND is 56Ohm no powerplug and standby resistance between Red IC leg 1 and Blue is 36Ohm under load resistance between Red IC leg 1 and Blue is 4.715kOhm no power plug connected resistance between Red IC leg 1 and Blue is non...

@Gman Fan and DVD drive connected. Blue: 1,772v Black: 3,445v Green: 2,514v

I'll do my best; might be later today or tomorrow.

@Gman As requested ;)

@Gman I recieved my PAL 79004 board today. Other then being PAL are there any major differences between 001 and 004? Is there anything I can do to help besides sanding this Motherfucker "It was hard to acquire and still want to make a portable out of it :)".

Not 100% Just some alcahol you get at the pharmacy

After trimming and sanding my boards I submerge my boards in a bath of cleaning alcohol. That way I can remove any metal resedue that may have found it’s way between components or under the GPU or CPU.

I'm having a similar issue as of today. With me the Almost trim drops voltages very sporadicly. I dropped it yesterday :(. Can that cause issues?

Good job @Gman . But holy shit... 6 regulators! While you're at it, could you test something for me please? http://www.gamesx.com/wiki/doku.php?id=av:playstation_2_rgb_sync This guy found H and V sync on the PS2 slim boards. But something about the RGB signals being digitized?! Try if you can...

Ok I get that sure! Better to have concrete information. But hard work and effort should still be praised I believe ;)

Ok... Seems a bit harsh don't you think? What's with all this flaming these days... The guy just wanted to share some info that might be usefull to others yet it seems to be the custom these days to just wave these kind of contributions aside... I get it you guys are angerd by all the questions...

It's from my own personal stock I got from AliExpress. And thank you.

Somebody asked me to mod his GameCube system for him with a Wasp Fusion modchip. Thought I'd share it with you guys. The Wasp is installed in such a way that if you would open the unit you can disconnect the modchip easily from the FFC cable. All pins and power and ground go thru the FFC. Pin...

My Wii portable will use the same form and paintjob ;) Thank you, will do my best! Updated first post, added solt b micro sd gecko and a fan switch for keeping the system cooler and external rumble for multiplayer on 5v with an extra regulator. The heat had me worried... Most games run just...

Thanks! They are sturdy, yes. They support 480i because I tested it lol. V6 is the one with the smal driverboard correct? The screen connector is in the middle.