Search results

Would you care to further explain those mixed results? I'm curious towards what you have achieved.

Any progress made with this?

That's way to much man! Thinkuh smahru, rike a Japanesuh peniseru.

Probeer RS Component voor regulators. Translation: Try RS component for regulators

Belgium or Holland?

Have you had these kind of drops before or are mine really over the top?

So new board (PAL) and new regulators and again same issue :/ 29.2Ohms GPU 1.9v stock regulator 1.859v connected only gpu 1.805v gpu and cpu bridged 1.728v custom regulator 1.602v connected 108.9Ohms cpu 1.75v stock regulator when bridged with GPU 1.69v custom regulator 1.534v connected...

My latest build was around 850grams with batteries, wasp and trimmed motherboard. Just shy of a kilo.

Something about a Rev C being used just makes me angry. Good luck with the build! Make us proud!

After I finish this portable I mean

Third board and again issues. Regulators are bust so it seems... Will try new ones once they arrive on a different board. New personal record for me. 4th GameCube board.

@Gman Ofcource I checked... That's what's got me worried :/ After this one I'll try the Wii

@Gman, But such drops... Is that normal? Edit: I have a component cable chip connected on the trimmed board if that matters...

@Gman So tried my custom regulators and same issue :/ Pth08060 1.8v not connected 1.629v connected Ptr08000 3.335v not connected 3.225v connected Ptr08000 1.579v not connected 1.467v connected Tested on trimmed and non trimmed board. Bench powersupply used with both boards on 7.2v Amp...

Added an extra wire from regulator to GPU and now I read a nice 1.701v Will do some more testing tommorrow.

The stock regulator is being powered by the Original GameCube powerbrick. 24awg are the powerlines from regulator to GC motherboard Using composite video with original AV cable (PAL version cable)

I'm using standard 24awg. Nothing special. Board is cut hybrid Almost and OMG

@Gman I'm having this weird issue where the GPU only takes 1.620v from the stock regulator... Same stock regulator is powering the CPU separately with it's own cable and is consuming ~1.68v According to my knowledge it should be the other way around :/ Games run smoothly, no weird video...

It's up to you if you wang to use that as a guide. Imo the best way to start is to check worklogs and read them. Lots of ideas can be inspired by the work of others.

Is there a POT between video and gnd going to screen?