Search results

What a day it's been. I assembled the AIO and not even five minutes after building it I accidentally fried the RCP (didn't see tiny solder ball shorting the cartridge ffc and then accidentally put the cartridge in the wrong way, guess it didn't like that). It's not the easiest to assemble with...

This is a Wii micro I made quite a bit ago. It's functional besides having a weird glitch where if you use component cable after 20 minutes or so the video bugs out. Never figured out why, probably need to swap the wii motherboard. Never had any issues on composite video (kept it playing for...

I just searched "wii screwdriver"

You need it for disassembling the wii

Impressive Nold!! You managed to make it extremely compact but doesnt look crowded or uncomfortable at all

did you install BBloader with VGA enabled?

Yeah the samsung battery is good choice. 1S4P is OK.

Looks like a decent board. It'll work just fine with the rvlpms just make sure you set the configuration to 12V maximum.

The goal of the rambus channel layout is to meet a 50 ohm impedance. According to some simple calculations mine is a bit more than that actually. It's determined by trace thickness, height, and distance between parallel traces but their could be many more sophisticated factors. But to answer...

you can fit it anywhere

N64 AIO (All-IN-ONE) The 3X3 core is confirmed working. Now it's time to kick it up a notch. This here is N64 core + PMS + digital audio amp. FFC connectors for the cartslot and digital video (for ultraVGA/HDMI or N64advanced)

Nice work!

I would recommend only the 79000 to be used with the guide. The revisions are very different and the trim can not be repeated on the other boards.

Made a PIF Breakout board with all the minimum required components to make trimming/debugging easier not having to guess if the chunk of board you trimmed off has all the components/connections. (note all the 0603 resistors I tacked on to the PIF). The pads are actually 0603 pads but I used 0402...

The trimming guide is only for the 79000 series, correct. The PS2 90000 series might be OK for portables but you can trim it the same.

We ship USPS 1st class international, it should deliver anywhere. I imagine it will take a few weeks once it is shipped.

I dont see anything from what I can tell. If you want you are welcome to send them to me and I'll re rest them and see if there is infact an issue with the device itself (just the pcbs, not the whole gboy).

The ground wire is routed over the led resistors, maybe try cleaning that up. In general the wires should not be routed directly over components there should atleast be a gap. So the wires on the usbc board could be tilted up a bit to be sure they arent shorting (which is why the solder on the...

This doesnt present confidence. All the wires have bit too much copper exposed after the joints. It's tricky managing it with the wrapping wire since it melts easily but it could be better. Then there is solder on the SDA wire where you connect the ground wire, not great. Is that residue or...

I'm not sure, perhaps just full size hdmi port and if its possible to fit a cut up GC controller port