Search results

Nope

These scans look great, thanks for adding!.

Pictures of your setup may help, also it's wise to remove the 2nd port memory card if you're loading from SD.

You've mounted the drive in OPL right?

Wrong thread, look in the PS2 ultra Slim thread for details on what you need to do.

Joycon controller Scan Contains: Joycon Controller Right Top Shell Joycon Controller Left Top Shell Joycon Controller Right Bottom Shell Joycon Controller Left Bottom Shell Joycon Controller Right Midframe Bracket Joycon Controller Left Midframe Bracket Joycon Controller Shoulder button Joycon...

The AV pinout is the same across all PS1 models so you can look at the RGB wiring used earlier in the thread.

Lucky for you these are pretty high res meshes with around 350,000 polys.

These are only meshes unfortunately.

You literally quoted the post with the info you need. The H and V sync lines are here: And the RGB lines you can pull directly from the AV port.

Super Famicom Console Scan Contains: Super Famicom Console Top Shell Super Famicom Console Bottom Shell Super Famicom Console Top Cover Super Famicom Console Front Cover Super Famicom Console Controller Port Cover Super Famicom Console Eject Button Super Famicom Console Reset Button Super...

First of all, if you're discussing the PS2 Ultra Slim you're in the wrong thread. Secondly, failure to properly research is nobody's fault but your own. Others have completed that project without issue. As I've already mentioned, OPL issues are best discussed and researched over at PSX-Place...

OPL is it's own separate project with tons of threads on it over at PSX-place. Troubleshooting it is really beyond the scope of this thread. If you want to confirm if it's your wiring or not you're probably best using an MX4ISO memory card adapter.

Xbox 360 Wireless Controller Scan Contains: Xbox 360 Wireless Controller Top Xbox 360 Wireless Controller Bottom Xbox 360 Wireless Controller Shoulders Xbox 360 Wireless Controller Shoulder Mount Xbox 360 Wireless Controller Grip Piece Specs: These are high poly scans, average poly count...

You should have no issues trimming along the same edge, you may want to send pics of the back of the board just to make sure the 5v reg for the USB isn't in the way. [EDIT] Doing some further checks it looks like there's nothing on the underside. Seems like the other regulator for the 5v USB...

It all looks pretty okay apart from the 5v reg which has been sanded slightly. You do have a FCMB memory card connected when booting the system?

Gonna need pictures of your setup.

As it seems some people have been getting stuck on the software side of things I figured I'll update this here. Make sure you're using the latest BDM4 version of OPL for best results, you can find more information in the PS2 SD loading thread here: PS2 SD LOADING THREAD

1) Purchase a taller tact switch similar to this: 2) Mount it to the bottom of the case with a little bit of glue in the same location that the lid switch would be. 3) Solder one leg of the tact to GND and the other to the Reset pad as shown in Tito's video.

You also need to mount the drive in OPL, there is a setting in OPL called "automount" or something similar which will load the contents of the card when OPL loads. If you need further help you'll need to start your own troubleshooting thread in the Sony subforum: Here