Search results

I should probably rescan, that was an earlier one and isn't great compared to my recent ones.

@Nold I updated OP to include the Chroma and Luma AV locations for S-video users.

This is a known issue with 6 layer Wii's. As far as we know there is no fix.

Does your monitor accept 15khz signals?

Absolutely fantastic stuff! you should also upload/host your files on Bitbuilt ;)

If you're anything like me you probably have 50 Wii power bricks laying around and zero GC power bricks. So I designed a 3D printable plug that can be used to convert the Wii brick for use with a Gamecube. Just insert the prongs with the correct polarity (12v on the curved side) and use hot...

Minor update: Manually wired the SD extender connector so the slot at the rear of the case is now operational. Feet have been designed and added. Vertical stand designed and printed.

PS2 Eye Toy Scan Contains: PS2 Eye Toy Top Shell PS2 Eye Toy Bottom Shell PS2 Eye Toy Base PS2 Eye Toy Focus Ring Specs: These are high poly scans, average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit certain parts of the object...

I have made some slight adjustments to the design for improvements to wire running as well as additional bracing for parts that undergo considerable pressure such as the AV port: And have further played around with colour, unfortunately the filaments I have just aren't close enough to the...

(Yes, I know this looks like a cutting edge post but the project isn't complete so just enjoy the high quality GIF's) How did it start? a few months ago I did a bunch of undervolt testing on the Wii for a potential future project and during that time I figured I'd undervolt test a few other...

It looks like it'll be uncomfortably top heavy.

Just regular supports for your slicer will be fine.

If you use a PicoPSU or similar for the Dreamcast (5-12v DC in rather than 120v-240v AC) this sort of mod would be mostly trivial.

Sega 32X Console Scan Contains: Sega 32X Top Shell Sega 32X Bottom Shell Sega 32X Cartridge Guide Sega 32X Cartridge Front Sega 32X Cartridge Rear Sega 32X Cartridge Flap Front Sega 32X Cartridge Flap Rear Specs: These are high poly scans, average poly count per mesh is about 2,500,000...

Undervolting Vterm is basically pointless as it's such a small saving but figured I'd list it anyway.

Unlike the much more complete Wii undervolting "guide" this is just a smattering of info found when undervolting the DC, PS1 and N64. Dreamcast info (8w to 5.5w) N64 info (5w to 3.5w) PS1 info (1.5w to 0.7w) Like everything, use this info at your own risk and results will very likely vary...

I appreciate it. Truth is that the scan was always going to be released no matter what, the only difference being that if there was enough interest I would have released it in a "ready to print" state with all the screw posts/stand-offs/blobby bits all cleaned up and replaced with new geometry...

Namco Guncon 2 Scan Contains: Namco Guncon 2 Right Shell Namco Guncon 2 Left Shell Specs: These are high poly scans, average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit certain parts of the object then the scan will contain 'Blobs'...

I'm fairly certain they are just unmarked Panasonic cells.