Search results

Here is an update about the project. The Wii is ready my friends, everything is working properly: - HDMI with VGA input. - Composite video over a 3.5mm connector using an small switch to turn off vga. - All 4 Bluetooth and wired controllers. - Nintendo Switch power adapter with its 15V I had...

Yes 100% Power is not an issue anymore. For the next steps I will be doing some stress tests and also measuring the thermals

I went ahead and added the power switch, used the one that came in the Gamecube I sacrificed for this, seems like the power issue is fixed now, here are some pictures about how it ended up:

Sorry, I don´t understand the suggestion, can you try to explain it better please?

I was thinking about this too, I have some big capacitors around I use for Drones so I will do this in addition to the power switch and see how it goes.

The original Nintendo switch power adapter is rated for 15v at 2.6A Which should be enough as the original Wii power brick was 12v at 3.7A I'm using an USB C adapter that comes with the chip that tell the Nintendo switch power adapter to go with the full 15V, maybe it takes some milliseconds...

Long time with no updates, I've been busy with some personal things. I wired up the voltage regulators and USB-C connector to the board,plus the USB drive, though it was not working the first time: In addition to that, I added a male JST plug for testing using composite video, which turned...

Edit: the ones posted in this thread would be awesome!

Hey man do you have some spare boards available? I in the need of one of each.

Hello my people, I am planning to rebuild my G-boy portable I made about 1 year ago but this time using the right tools and parts, with a more quality cooling and case in general. So I'm wondering if any of you have some spare PCB for the front and back buttons, as well as for the speakers...

Hello my people, so today I decided to take the step and trimmed the board. It was a very good trim. Here are some pictures of the process: I covered the CPU and GPU to prevent dust from coming under those. I have also uploaded the video of the trim process to youtube here: Sorry for...

Hello my people, I had some spare time today so I went ahead and designed the 3 brackets I was missing to hold the components of this project. The first one is to hold the 4 custom regulators for the project: It is held by the soldering pins coming out to the other side where I will...

Hello my people. This project is now complete, here I have the board with all the wires soldered, and also added a JST female plug to power the ESP-32 board: I added the usb charge module at the bottom of where the vivrator motor was, and a lipo battery as well. There is an small push...

So here is an update in the process of this project. I removed all the components off the GC Controller board: And also wired the power and programmed the ESP32 module, it has a 3.3v regulator and also the resistor between 3.3 and the EN pin: Next step was to start soldering the wires, I...

I have also received the longer FPC cable for the switch dock circuit, which will allow me to place the USB C in a better position for this project: But it didn't work right away. The pinout is the same and there is continuity in both sides: After further inspection, I noticed that the are...

Hello my people, I forgot to make an update about an usb ports holder to attach the usb memory card to the wii: It holds the trimmed wii USB port with its screw hole and also has a leg in the right to give it more stability. Here is how it looks with the memory card inserted: As for...

Sorry I forgot to reply to this. Nothing too fancy going on here: The USB fits right in the slot of the mem card shell, so once I get the job done on the gamecube case done I am just planning to put some hot glue to keep it inside and call it a day.

I am working on something similar like this, but I will also integrate a NX Switch dock inside it. I mean, we have a lot of space inside it anyways. Look at this bracket to hold the Wii USB that allows you to use the memory card slot as an USB port: I will also attach the STL in case...

Hello my people. I have been working on a bluetooth control using the original GC controller and an ESP32. This project is inspired in the article of the youtuber Yakara Colombia in which he presents the following pinout for the GC IC matched with the pins on the ESP32: And the following...

Hello my people, Here is a quick update of the project. I noticed that I can keep the switch dock board at the same position, it uses a 30 pin 20706 60V VW-1 flex cable, so I am going to buy a longer one online to be able to keep it there. As for the wii side, I am going to use the following...