Search results

This I can also agree with, although I've only gone with 5" screens some are more cheaply made than others. The only problem I've run into thus far, some had problems dealing with lower lower voltages. One ran fine off 8 volts, (as low as I've tested so far) while the other started getting...

Coming from ModRetro and having the problem of of working off old information I can personally tell ya that the screens that Gman, (and everyone else) suggested are WAY better than the PSOne screen. I got half way through my GCp build with the PSOne screen when I got this info and ended up...

This is true...And yeah, I see that the console by itself is only like $89 on eBay so I ordered some antennas for it. Two 14" 9dBi Omni-directionals... I figure if I'm going to do it go big or go home. After all, bigger is better right, lol!! "2 x 9dBi 2.4GHz Omni-directional WiFi Antenna...

Awesome, thanks for the updates SS!! I still haven't started on my Wii yet, (illness, holidays and having a 2 year old will do that, lol!!) so maybe good things will come to those who wait. :D At least your GCVideo from BadAssConsoles is in the mail, my order is going on 4 months old and the...

Nice job, and I bet it feels a TON better/more natural for VC games!! That was always the biggest issue for me with the classic games with a modern controller, just never felt quite right, lol!! :D

I've still got my GameBoy SP and might try this out. I've been wanting to add a headphone jack to it for awhile. :)

Sorry, had to add this one for the Pokemon fans... ;) POKEMON RED AND BLUE W/ Smosh (Honest Game Trailers):

If you guys get the board and haven't seen/heard of these before check out these videos. I love these things and there are literally a TON of them by Smosh Games. I am a HUGE fan of all these games, especially Zelda and love comedy so these are just awesome to me. If nothing else ya got to...

Awesome!!! That is one of the best feelings in the world, finally getting something to work after beating your head against the wall over it for so long!! Congrats!! :) Now don't be holding back on any progress photos and the finished product... :P;)

Gotta say I love the organization and shelves/bins there @JacksonS that's what I'm shooting for. Really nice setups everyone!! Gotsta have somewhere nice to get some work done!! :)

"Let me show you around. This is my lab table. This is my work stool and over there is my intergalactic spaceship. And here is where I keep assorted lengths of wire..." - Hubert J. Farnsworth Unfortunately I don't have an intergalactic spaceship... unless you count my Start...

The only other thing I can think of if you're still having issues would be to check continuity from the Cartridge Slot pins back to the original pins on the CPU and RCP. Here is a diagram from a long lost website, all credit to the almighty @ShockSlayer for this!! :)...

This is true but I'm not sure, just throwing out any ideas I can think of that might/could help. I just know that I have run across some electronics that tend to be picky when it comes to wire lengths and voltages. Here is a video from a YouTube video series from a seasoned veteran that I've...

That's what I've heard both from reading on the cart relocation and in different videos I've watched was to try and keep the relocation wires as short as possible to prevent it from becoming unstable or not working. I think I read somewhere that 3 to 4 inches was the suggested length, but it...

Good question... I've got to pick up a controller for my N64 project and I've seen these around and was woundering the same thing. I know the analog stick on the original N64 can be crap so I wasn't sure which third party controller is the best/easiest to work with that will accept a GC joystick.

Ahhh, gottcha. I just happened to notice that and didn't know if it would help or make a difference. Since I will be using the same board for audio here soon so I'm learning along the way too. :) @GarageFactory , definitely interested to see how this works out for you... :)

One thing I see is missing a ground wire in between the "INL" & "INR"... that might be the problem. I think that is the internal ground for the speaker input. I have 5 of the same audio amp from Amazon for my projects along with the specs sheet but haven't wired the up yet. Looking at the...

Nice, looking good there Gman!! I really like the layout and how professional it looks. Can't wait to see some more pics!! :) I've really got to get a 3D printer... makes casework look so much better and easier. Of course there is also a learning curve for the 3D software. Thus why I have...

LMAO, Nice!! :XD:

I just realized that when I bought my Wii U I purchased a 3 year extended warranty because I knew the GamePad was prone to breaking so the real questions is... say what the hell, void the warranty and hope to get more range or wait a bit longer and void it after the switch comes out...