Search results

  1. The_Smeags

    Question Reviving old board

    Here's an old board I tried fiddling with a couple years back when I was told that wiis became a popular modding console, I tried it a couple times, but kept failing because I wasn't properly testing it with the right power source. So after looking back at this now I thought I'd give it a try, I...
  2. The_Smeags

    Discussion Creating a list of materials for FIRST PORTABLE

    I've never done much to a wii, but my guess is the guide. The section about the audio and video talks about the pins around those ports, I believe it's the two pins that have the word (sensor) included i.e. Power and ground that and I'm pretty sure the port only has two pins.
  3. The_Smeags

    Discussion Creating a list of materials for FIRST PORTABLE

    That's pretty much up to you if you know you can put one together with the case you have in mind Most cases work well with the wii since the trim is really good. But yea I'm not sure how you would get an envision case, you'd have to talk to them about it, especially since that thing uses a weird...
  4. The_Smeags

    Prints

    It's been a while, but It's coming along better than I though.
  5. The_Smeags

    Question No video, first portable problem.

    To confirm if the regulator works try using the original power supply since it has both lines Also, I'm not sure if the converter boards the issue, did it work before you soldered anything to the 64? And if the screens flashing I'd say it's your carts slot relocation I'm pretty sure I've seen...
  6. The_Smeags

    Prints

    Hahahahahahahahaha I couldn't watch it all that was weird
  7. The_Smeags

    Prints

    I'm glad to know, that was before I was any good at anything besides line drawing. I got help on the colouring portion of link.
  8. The_Smeags

    Prints

    I'll have the finished piece to show soon.
  9. The_Smeags

    Prints

    Anyone interested in a print of this portrait that I'm working on. I hope you guys can tell who this is I'll have the finished piece in a day or two.
  10. The_Smeags

    Question Wii Power Management System

    Gman gives no shi*s
  11. The_Smeags

    Worklog First Wii portable

    From what I've read I don't assume the wii gets hot fast enough for that to be an issue? Like it should boot before any given problems.
  12. The_Smeags

    Question Controller hookup on motherboard

    I honestly don't understand why you would cut that much off the area? My only thought could be a port that sits there? But on a serious note, you should practice running your wires more nicely. That 2.2k shouldn't be in the air like that lol Maybe your video line is too thin too. Try something...
  13. The_Smeags

    Worklog N64p MkIII

    Not from your picture, I meant that towards elektrix His wire looked thin for the main power line? But I guess that wouldn't be the issue His board just flipped the life switch. I had a board I took a chunk off around the bottom right, took off all the surface mount components around p3 and p4...
  14. The_Smeags

    Worklog N64p MkIII

    The wire you used for the main voltage line looks a little thin?
  15. The_Smeags

    Snes jr (model2)

    I bought one of these bad boys at a pawn shop It came with two original controllers, no cords or games It does work though. I just don't need this and would prefer it going to someone who can do something with it. I don't find modding something I want to continue with, but I figured I could...
  16. The_Smeags

    Worklog First Wii Portable Attempt

    If you're assuming it's gnd just use continuity to see if they're bridged
  17. The_Smeags

    Worklog RIIIIIP

    me and @caop1231 (well him) came up with the resistors needed to get the values needed for the regs. Ill be finishing up the testing and wiring at my place one of these days. And omg does it take forever to find the ones you need in a sorted supply lol
  18. The_Smeags

    Homemade Alien communicator/timemachine

    Hey wasnt this hooked up to a keyboard sometime in the early stages? Looks dope dude
  19. The_Smeags

    Worklog RIIIIIP

    look what i got in the mail. Gonna be troubleshooting my boards sometime today as well as the vc channel stuff
  20. The_Smeags

    Worklog RIIIIIP

    Forgot to add the quote back to shanks post so my reply is part of it lol
Back
Top