Search results

Hmm. Well i doubt ill be able to figure out the files for the wii. U10 outputted 3.3v I think im gonna have to work on another board..

theres no reset wired on the trimmed board. however, does there have to be a usb present? i thought a wii would boot to the main menu if there was no usb in the port? i had mine plugged in, but it might have been the wrong files for said wii. i lost track of them when soft modding other wii(s)...

still nothing. the usb powers up, just no video/audio signal...

LOL ok ill check that out real quick. for the mean time i was soft modding another wii i recently got. what a relief though

wired up av and power on trimmed board, av to a gc avout port and power to another wii board. i get the correct voltages just no video/audio. i haven't soldered the usbs back on.

Have a lot of stuff on its way. Aside from that i wired up av out, the usbs, as well as shortned the data wires on the bluetooth module. Something i was curious about was, on the guide, av has a few data lines. So do i have to do anything wit those? Ill have some pics up tomorrow

The wii would be a better choice imo. If you want to incorporate the wii side of the unit you can wire and mount the sensor bar port on your case, its what im thinking of doing. Aside from that rewiring the bluetooth module isn't super difficult either. At least from what i hear.

In that case just cut the components off with a dremel lol. Careful enough its easier than desoldering it all.

Itd be a lot easier and faster to remove it from the board.

Looking through ebay and ran into this seller. http://m.ebay.com/itm?itemId=251748761553&kmsi=true Hes running out so grab them now

Ordering some stuff today. Probably going with regulators and screen and maybe tacts and sliders? Have to order a case for my n64 mini.

Aurelio, the homie! So does this mean you could re-use the old wii for another? Lol

Im pretty sure theyre good to use. The only thing id question is if they are wired the same, which id assume so

RDC didn't seem to want to sell me something if i recall

haha go for it, i might have to push mine a little further back, if it gets in the way of the batteries, i simply tossed it on my board and noticed it sat nice next to the nand (the chip i want to say) glad to hear that, ill do my best to make this project work out, really lovin' the wii for...

thanks man, i was a little worried at first, but then i figured i'd scratch the traces at different sections since it couldn't bridge if they weren't together. might be able to shorten the data wires a lot more, i also used 22awg solid core wire for 5v and 12v. will swap it (probably) with...

relocated the bluetooth module, using continuity, it makes contact, no bridges. once i can test the voltages ill be wiring up av too.

sure will, i still have to cut that top left corner some more in order to allow the usb ports to fit anyways lol

the new board is trimmed, also did the u10 relocation, i just trimmed around it and kept it on the board, glued down and rewired. want to say it will work, but won't find out 'till its properly tested. how does it look? (btw it is soft modded - portablizemii) i might have a working board...

i figured the best way to test it before messing with regs is to simply jumper the voltages off another wii.