Search results

.

My u5

here is what i did. I installed letter bomb then bbloader. then I cut out the motherboard. I don't know if I put the vga and wifi patch any more. coated I install my voltage regulator and move u9 because I break u10. I had or bind to cut the trace on u5. I tried my card but no video...

My wii projet no video A test my power regulator The tension 3,3v ok 1,15v ok 1v ok And the 1,8 v on the board is ok I dont want a stend the error please help me

I think my bbloader is not correctly installed I not wifi connected , if my bbloader is not configured on no wifi , the board boot ?? My board is connect to av signal , it is correct or the vga signal to do connected ??? Sorry for my english

U10 trace cut aftet the photo On this photo not cuting

hello to day i test my wii projet for the first time. i not working :-( i cut the u10 trace and relocalise the U10 on the U5 i install bbloader i install a power regulator 3,3v 1,15 and 1v i bridge 1,8v on the wii motherboard And no signal Can you help me for boot the motherboard 6 Layer...

The bouton of wiiu gamepad piste

I just 6 layer in my possession

Ok i change to epoxy glue

For the PTH regulator the résistance it is good 87,1k 1% for 1v And 1,5k 1% for the 3,3V For resistance the most identical in my possession it is very specific ?

Ok and that is

ok look this , it is a regulateur charge in 3,7V ?? or a power up to charge in 7,4v ??

hello how then to charge two 3.7v battery to mount in series with a pcb charge usb in 3.7v

Hello I frenchiewii My projet is a wii u gamepad And i wand help for my power management I want use a 3,7v battry and a power boost to 7,4v To alim a PTH08080 regulator to 1v 1,15 3,3v For the USB i use a power boost 5v iwant use 3,7v tension for charing with a usb charger my battry it is a...

Hello This is projet today

Hello This is my projet. I works slowly at this Soiry for my english ;-) I works to the rear , i wantmake a 3d box with my printer 3d for the fan and battry

Hello this is My first projet a wiiu ga I want help for the PRD power supply I test a mini360 power supply but it is no linear tension .

Hello i trimming my wii vers 6 layer , installed the software befor the trimming And i work on the power supply based on PRD Look this picture I