Search results

I might use a rpi 2 to be safe and get the screen looking nice and bright, at least until a better power option arises. Only issue now is getting sound that isn't crackling

So the linked above screen and driver, a teensy and audio amp with rpi3 wifi deactivated in your opinion should be powered fine off a 1000C?

I am using the 3 B. Could possibly disable wifi and install roms via USB?

No worries! You can use a USB sound card and run the sound through that as I believe the 3.5mm jack causes the issues but this will result in more current drawn which would not help with the underpower problem.

I'll look into the audio issue for you. As for the underpower I think it's cos the 1000C isn't powerful enough. It sounds as if it isn't too much of an issue tho if 90% of the time it isn't there . Also I am not the most knowledgeable in any of this stuff so I think getting second opinions would...

Great work mate! Few questions, is the audio powerful or ever crackely? Do you ever experience the under power (lightning bolt sign) when playing N64 or using Bluetooth? Thanks!

I'm using this screen https://www.adafruit.com/product/1680 This driver board https://www.adafruit.com/product/2218 As for the batteries they have never been used so they should be the same voltage, is there a way to determine whether the charger in the powerboost 1000C will be adequate? Thanks

I kept getting a lightning bolt in the upper right hand corner (which meant it was underpowered ) when using the powerboost 1000C. Would the powerboost 1000C work with the 18650s? Thanks

Hey guys looking to use 2 Panasonic 18650s to power a raspberry pi 3 and 5inch screen. I need a booster taking 3.6v to 5v also a charging circuit (preferably one board which can do both), i would like the output to be 3A from the board to assure it will be adequate. These are what i could find...

I think I'd be better off using an existing Wii sensor bar and working out a way to run it off USB 5v.

Hi guys , Wondering if anyone knows whether it is possible to make my own USB sensor bar to use with dolphin or retropie. I have some 940nm IR LEDs. Thanks

Hi How would i know ? Below is the driver board. https://www.ebay.com.au/itm/HDMI-DVI-VGA-Audio-LCD-LED-Screen-Driver-Board-LVDS-Inverter-Diy-Monitor-Kit/161076658712?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649 Ive attached a diagram below to simplify. Thanks :)

Hi guys, I'm looking at doing an arcade cabinet style thing and have purchased a 12v 4A power supply to power the screen driver. Basically I only want one cable going into the unit so have to find someway of supplying 12v 4a aswell as two 5v sources to power rpi and speaker all from one 12v 4A...

Yes thanks! I basically won't it to be a detachable unit which has one cable and connects to the unit via USB allowing for 4 additional controllers. This looks like a diagram which would be helpful Thanks

Okay thanks guys! And still wondering about the 4 player GameCube adapter thing? Thanks again

I already have them I used in another project so just wondering if I could reuse it. Thanks

Hi guys two questions: Is this screen with this driver compatible with a wii mobo: https://www.adafruit.com/product/1680 https://www.adafruit.com/product/2218 And secondly is there a guide to making a 4 gamecube slot breakout box that attaches via usb to the wii mobo? Thanks

Hi guys, Want to take out the laptop screen from an old laptop and connect it to a rpi. Looking at using a driver board like this...

All good! I'll try my best to gather as much information from these ? Quick question are the original GameCube buttons more responsive/ better than a day lite button substitute? Also is there a parts list available ? Thanks :)

Hi this is amazing! Are the 3d print files available for download ?? Thanks :)