Search results

This is the wire I'm using. Ahk I was using around 300 deg C.

Hey guys, Trying to wire up the bluetooth data lines but can't get any solder to stick to the scraped lines. When i try to apply solder a wax like substance surfaces at the joint. Im using a flux pen. Wondering if maybe i have the temp to high or low on my soldering iron? Thanks

I didn't get continuity on any of the ground pins. I got continuity on one of the two pins but the other I was unable to test as the terminal was destroyed on the original u10. Thanks Fixed it. re-did the three u9 pins to ground and it fixed it thanks guys!

Yeah I attempted all of these. Is there anything I can test?

See photos: Thanks

I did that but it still won't boot

Okay great which pins are the ground ones ? Thanks

Hey guys just did a u10 (used the u9 as I broke the u10 chip) relocation and trying to test the Wii but get a black scratvsc screen? Any ideas? Thanks

Hey guys, wondering if there is a need to wire up two usb ports (1 will be occupied by the Samsung usb fit drive.) Thanks

Great thanks!

Yes but do I use two 100uf for one reg? Thanks

Hey guys, I saw someone advise putting two capacitors on each regulator. Is this a 100uF capacitor for both the input and output? Thanks

Id probably use VGA then a cable like the one below to convert it to HDMI. Would this give greater quality then using a Wii2HDMi (composite to HDMI)? Also I'm guessing I'd need to complete the VGA patch to have VGA out of my portable? Thanks

damn, how much extra we talking? I found one for $80 but not sure how legit the source is. Do people find that they are filling up 64 gb sticks easily? Thanks

Hey guys, Amazon has recently stopped shipping to Australia so I'm not sure how to get the USB from the BOM. Are there any others that work just as well ? Or does anyone have an extra one I could purchase ? Thanks

What's the difference between a GC+ & a GC+ 2.0?

Hey guys, Two quick questions. 1) Is it safe to trim a wii mobo on a bandsaw? It will allow me to do it far more accurately then if i was using a demel. 2) Does the usb stick used to install PM before trimming need to be the same usb that is used to load games after trimming? Or can you just...

Hi guys, I'm wondering what gives the best resolution and picture quality for my video out option on my wii portable. VGA or HDMI via a Wii2HDMI. I am not worried about the size of the connector for either just video quality. Thanks

Great advice thanks!

Hi guys, I have some questions about 'the red board'. First does it have the capability with an LED to tell you accurately when your batteries are charged (4 X 18650s using a 12V 3A source to charge/power). Next once your batteries have charged fully but the source is still plugged in does it...