Search results

I've tried setting up the USB , tried soldering USB data lines to Cm1 but I believe I've torn away the traces can I use cm2 instead? Thanks

Does a USB need to be wired up to test if the omgwtf trim worked ? Thanks

Hi guys, What is the recommended wire to connect via YPbPr from wii mobo to Eyoyo screen driver board?

Thank you price seems legit , $60 AUD

Okay but for testing when under load it's safe at these voltages ? Also about to purchase this usb stick from ebay anyone encountered any fakes of this kind...

No these weren't under load. Okay I will try to get these closer .

Hi guys, I have my regularors outputting : 1.042V for the 1v requirement 1.211V for the 1.15v requirement 3.55V for the 3.3v requirement 5.01V for the 5v requirement Are these acceptable? Thanks :)

Okay cool. I'm guessing you mean Dremel the solder lumps first right ?

I have access to a desoldering gun so i plan to use that

Yep got it! Now to desolder all those bulky connections :/

My Eyoyo screen arrived. Just wondering how to take it apart though ? Have removed all the screws and want to take the metal casing off without damaging anything but doesn't want to come apart. Thanks

Do you wire both negative pins of the two caps to the middle terminal of the PTH reg? Thanks

Hey I usually use Imgur to upload the photos but you should be able to see them now. I've attached photos of my reg setup (wondering if I've put the caps in the right place) and also my trim. Thanks :)

That'd be it thanks!!

Hey guys, Im testing my bluetooth on an untrimmed wii mobo with pins 2 & 17 shorted on the MX chip. I have pin 12 of the BT connected to a tac switch which then connects to 3.3v terminal but cant get a new mote to sync when pressing the button on the tac and the red button on the mote. Any...

Yep it booted! Bluetooth mod successful. Having trouble getting new Wii motes to sync. Have a tactile switch wired between pin 12 and 3.3v. Is there something Im missing?

Yeah I'm just hoping I didn't wreck it by trying to power it with this big blob of solder shorting the c101 and nearby components

I accidentally dropped a blob of solder and lost the component c101 (see photo) when I plug the Wii in the power LED doesn't light up. Have I stuffed my Wii? Thanks

Thanks! Yeah i have been doing all this gonna try with a higher temp !