Search results

So basically connect the charger to the board Ok then I have the small charging port that every uses Is the smaller leg positive or negative?

Ok so first time trying to solder the batteries onto the board without a battery holder I had this simple 5v charging port to power the Wii But then I decided to try and use the batteries since I got my red charging board but I'm having trouble since I soldered the batteries but I'm not...

Seeing as how I just had a the same exact problem what I did was change my ohm resistors to a lower.... uhm... resistance?... not sure what the right word is but whatever that's what I did and my board worked when I did that

I did wait a bit nothing pops up And yes the gpu/CPU do get hot Edit: I might have found the problem but it's up to debate I was using a 5v power supply from my android charger I then just used a portable charger I had and it ended up booting up the no USB detected pop up So maybe it was the...

No I don't have audio hooked up yet Does it really look rough I sanded it ALOT MORE and it's really smooth

Ok so now I have a new problem I got my regs set up but when I try to hook up my LCD I get just a blank screen it turns on as if it's connected to something but nothing shows up

Ok so I made my regs and this is the result that I got Not connected to Wii: 3.3v-3.31v 1.15v-1.14v 1v-.99v Connected to Wii 3.3v- 3.24v 1.15v -1.06v 1v- .90v I just want to know if this drop would be the result of a short or do I just need to change my ohm resistors to a different value...

Dremel Also the picture in my previous post was the result of me sanding for a while still not done tho

When checking resistance does it what does it have to be on (I know ohms ) but what setting 200,2000 etc. Ok so in the 3.3v I got 7.63 (20k ohm settings) 1v is .31 1.15v is .05

Oh ok that's much clearer thanks But question still remains does he batteries need to be hooked up and by that I mean switched on I've read the other forums and I still don't understand when you guys mean under load or other terms regarding voltages just trying to understand one piece at a time...

Not trying to sound rude but could you dumb it down of what you meant im not good with words And do I need the batteries hooked up to do this?

Just want to check When do i know that I sanded the Wii enough to stop

I have 800 and up at the moment can I start off with those or is it better to get the 200 & 400 to start off with

OK SO FINALLY HAVE A SUCCESSUL U10 Relocation TRIMMED THE WII WHAT IS ORDER OF SANDPAPER NEEDED AFTER TRIM

That's a lot of alternatives but I am set on the psp case I was thinking of cutting the case up to make the space bigger and then filling in the caps with some pieces of plastic for the front and then somehow make the back piece ( speaking of which where would I find some pieces to fill in said...

i was wondering if this was possible Placing a Wii into psp shell I know I would need to make some adjustments to the case But I wanted to know if anyone knows a good way to make the back piece, i need to obviously make a new back piece for the batteries and heatsink fan etc. i don't own a 3D...

Yeah I didn't want to cut too close since I didn't know what classifies as decent so I decided to go the safe route Next time tho I'll try it with a working wii

Ok since my Wii went ka-poot I decided to try and practice on the omgwtf trim and I also trimmed the gc ports too So anyone wanna give me some criticism on how my trim looks

Is it too late for this Wii u10 relocation I think I completely burned off the spots since solder won't stick to it anymore EDIT: NVM I NEED TO GET A NEW WII THIS ONE KINDA SPARKED AND DOESNT EVEN POWER ON ANYMORE OFF TO FIND Wii #4 and try to relocate that one

Ok but how do I pay for it again?