Search results

That would suggest to me that the GC+ itself has a problem

IIRC any linear taper 10k pot with a matching footprint will work. Wire you can get anywhere yes, so long as you remember to use stranded wire for voltage supply. Solid core wire is only advised at thin gauge (32 to 38AWG) for logic connections, like the U10 wire, controller data, and any other...

This is excellent! Might have to do one of these myself eventually

Resistances are never exact due to differing trim dimensions and part tolerances. It's mainly about matching the big/small pattern to known good margins and making sure nothing comes up as a single digit resistance, which would indicate a short. Your readings looks good.

Well done!

Yeah that missing cap will foul the logic on that line. I haven't checked the compendium, but usually those little passives by the CPU/GPU can only be found in that location and would need a donor board anyway. Remember to clean any burnt flux off the PCB before powering it on with your next...

Afaik you can only sync wiimotes when the system is running, so 3.3v standby just needs to supply the BT module's running power. Regular 3.3v can be used for the sync button. No idea if power on by Wiimote works on a trimmed Wii though. I will be interested to see if it does

IIRC it's partly about cost, wiring simplicity, and weight. You totally could edit the shell to fit more cells in, and double your runtime but you'd be increasing the overall weight and shifting the balance when held. As for combining different cell capacities, we don't recommend it. Even...

I am very interested in seeing this work

All good. For your next trim I recommend placing the rougher sand paper on a flat table and doing circular motion to get your major trim edges nice and flat. Rounded corners are good, but you want your major sides to be straight so they can't hide any shorts. Should get a better result that way...

Good lord.............. Son, wtf is that art project of a U10 wire? That's unsafe as fuck. You're meant to have a millimetre or two of exposed copper, not enough to form a Dreamcast logo. And yeah that Nike swoosh you've done there by the NAND is pretty gnarly. I'm not sure if that location...

I believe you can disconnect SDW/SCW from the U-AMP and that should force disable the HUD. It will also disable RVLoader's ability to see the U-AMP readout, but if the issues are from crosstalk then it may help. That's about all I can suggest I'm afraid. I've run dry on my knowledge for the...

Yeah the Gamecube component cable chip quality is heaps above the Wii AVE. Even with deflicker you can still see the difference clearly. If only the FPGA chips for GCVideos weren't so expensive............

IT LIVES! Grats my man!

Trim lines look good! Nice and straight, rounded corners, no cut through components, plenty of margin around the essential traces. Well done

My dude you need to cut this out. All you ever seem to post are these chatGPT-esque schizo lists and it's becoming a problem. Stop asking the same essay question and just make a damn Wii. Look up the Ashida, G-Boy, and G-Wii, and pick one.

Name changed

Ignore that recommendation. The Ender 3 is cancer dogshit and the MK3S is outdated af for the cost. The Elegoo Centauri Carbon is the current single material price to performance king, and matches the Bambu P1S for a mere $300 USD. The Bambu A1 is also a fine choice on sale if you don't intend...