Search results

  1. Festiva

    Solved Fixing failed u10 relocation

    That pad of u10 connects to 3.3v, so you should be able to just connect leg 5 of u10 to 3.3v. I'd also recommend looking at this u10 troubleshooting guide if you have any other issues.https://bitbuilt.net/forums/index.php?threads/rough-draft-u10-troubleshooting-guide.2317/
  2. Festiva

    Question 6 Layer Board Displays Black and White Lines

    Darn, well atleast it gives me the excuse to try to find a 4 layer board now.
  3. Festiva

    Question 6 Layer Board Displays Black and White Lines

    So I have a 6 layer board that is displaying black and white lines after I've trimmed it and done u10 relocation. Here is what it displays- Here are some pictures of my wiring- I was not able to get the Wii to boot before trimming it because it would short everytime I tried to power it on. If...
  4. Festiva

    Solved Custom regulators outputting higher voltage when connecting to Wii

    I actually just got it to output video, all I had to do was have a ground wire go to the Wii then connect my regulators to the ground on the Wii. Super simple and I can't believe I didn't figure it out sooner.
  5. Festiva

    Solved Custom regulators outputting higher voltage when connecting to Wii

    Just checked it and its 31.4ohms. Does it matter what the resistance is on the other voltage lines?
  6. Festiva

    Solved Custom regulators outputting higher voltage when connecting to Wii

    So I checked and 1v and 1.15v are correct. There is continuity between where you solder 1.15v and ground on the Wii board but not between 1v or 3.3v. I did sand the board with 1000grit sandpaper aswell and I tested my U10 relocation before trimming so im assuming that not the issue. Here are...
  7. Festiva

    Solved Custom regulators outputting higher voltage when connecting to Wii

    I just finished trimming my Wii and everything seems to be fine, but when I connect my custom regulators the voltage is higher then it should be. Without the Wii connected the regulators output 3.31v, 1.155v and 0.98v. When I connect them to the Wii they output 3.30v which is fine, the 1.155v...
  8. Festiva

    Question Trim that leaves the USB and AV Port?

    So im getting ready to trim my 4 layer Wii and was wondering if there was a trim that left the USB and AV Port working? I understand that cutting less of the board is harder to do but it would help me a lot with testing. I saw that @jefflongo built a Wii Micro that still had the USB and AV port...
  9. Festiva

    Want to buy 2s CMB.

    Working on my first Wii Portable and need atleast one CMB. I know that I can buy it off of eBay but im hoping to find someone willing to ship one to Canada since i've experienced long shipping times from things overseas. Here's an example of what im after...
Back
Top