Search results

Thank you

A little update So I started to put everything inside the case I wired almost everything and it seems to work fine but there's a little problem,it doesn't close I tried many ways but I just can't close it. it seems that I'm gonna have to print the front case again because that's the one that it...

Thank you,i guess if I had a better 3D printer the case would've looked even better

Yes it is

Update So I'm done painting the case it's not perfect but I like it,now I'm ready to start putting everything inside. Here are some pictures of the case Here I have all the buttons,the joystick,screen,controller and the rest I forgot to mention that I'm using a rumble pack and a 1mb...

Just solder where the blue wires are which is 3.3v the white wire is for 12v you don't need that one and yes you need to reveal some copper from those points to solder your wires

This is for the relocation of the 3.3v from the back And if you still have no image on the screen then put a 2k Ohm resistor between 3.3v and PIN number 8 from the PIF like this

here's an update of my case I finally finished printing my case,I had some problems with my printer before I started printing but now it's working fine so I printed the extrusion as a separate piece just like you told me shank thank you,also the back of the case I did it in 3 separate pieces...

Hi everyone I been working on a N64 for a few weeks now and this is my second time that I try to build one so I hope I can finish it this time :D here's what I have so far. im using some parts from a RDP that i have and it doesn't work anymore only the screen works,also im using the buttons for...

This is a really cool design,I like it

Ok there's one more thing you can do put a 2k Ohm resistor between 3.3v and PIN number 8 from the PIF Like this I'm working on a 64 portable too and I had the same problem i wasn't getting any image and after I put the resistor It works but I didn't remove the jumper pak slot like you

you need to reconnect the 3.3v like this

can you put a picture from the back of the board?

Is not hard to learn how to use CAD I've been working on two cases one is for a Nintendo 64 and another one for a Snes i'll be posting some pictures of my work pretty soon

wow this look really nice ,what color are you going to paint it?

You should go with the retron 3 the nes board and the snes are separate and the nes board is really small,the snes board and the sega are together but you can cut the board and use only the snes and make it the same size as a snes cartridge

Try this one NTE Electronics WH26-04-25 Hook Up Wire, Stranded, Type 26 Gauge, 25' Length, Yellow https://www.amazon.com/dp/B003N39UP2/ref=cm_sw_r_cp_api_e0cAzbY7ZP2D2

one more question,the wires you are using are 26 AWG or 28AWG?, i ask you because i tried to do this before but for some reason i never made it to work,maybe i used the wrong wires

how long are the wires?

What I mean by horrible results is everytime that I try to print my case with my 3D printer using ABS it tends to bend from the córners but now I'm going to use PLA Instead