Search results

Thank you both for answering my question, Im going to try the Standard Led first and see if I can make it work otherwise I’ll get myself a Wii and do it that way.

Update!! i finished wiring the Ultra VGA ,I was really careful not to mess it up since I only have one, I started soldering the wires to the RCP chip ,I passed them through the holes in the board just to make the wiring to look more clean here's how the wires look under the board after...

Update! I removed everything that I didn’t needed it and i started to trim the board, I used a cutter knife to do it instead of a dremel, I didn’t wanted to hit the Jp by accident with the dremel,it took some time to trim the board but I think It went well after sanded the board i was ready to...

yes I am, if only I had known that marshallh wasn't going to make more I would have bought another one.

Hey nice job wiring the Ultra Vga, not having more around i know you have to be very careful doing it.

Thanks man, the relocation of the JP is way easier this way you don't have to desolder all those tiny components you just need to sand the board a little bit and that's it. Yeah I would love to get one, let me know when you finish the boards :D I just did it to show that I trust the way i did...

Is been awhile since I posted something here but I think this is the right time to do it again. I'm doing a N64P, first thing i did was to turn on the N64 to make sure it works good, I played a few games without any problem. next thing was to swap the ram with 2 4mb,I used hot air and it went...

I really like the case, very unique.

i been working in a N64P too and im having problems with the controller too, i want to use a Nintendo switch joystick and i tried to program the attiny24 chip too but like yourself i have not been able to do it too. A few years ago a bought 4 of those mini64 from downing it was the v2.1 but...

This is so cool!!, I was wonder if you guys are going to put another Pms for sale for the N64 in the future like the one we had in the bb store?

Thanks,I’ll check it out.

Hi. Does anybody knows where I can find the files to program a Pic,i want to use one of those nintendo switch joysticks on a N64 portable that I’m working.

there is one in the bitbuilt store https://store.bitbuilt.net/u-amp/

This is amazing portable Gman, do you guys still have plans to update the N64 guide to trim the board that small?

Right now it shows 4.0v is a brand new Samsun 18650 3.7v. I have a few more and those are 3.68v, even using two batteries with the same charge in parallel I have the same red light

I think I need help with this, I’m still getting the red light on the PMS, the ps2 does still power on and I have image also the batteries are charged so next I put thicker wires and I had the same results,I thought it could be the ps2 board so I trimmed another one and sanded really good and...

Bad news I couldn’t find the problem,I removed the board from the case and connected to the pms only, I didn’t wanted to connected the memory card or the audio just to see if one of those were causing the problem but not, it was doing the same thing the only time the green light was on is when...

so I have almost everything done after some problems with the memory card that I had, now I have another problem,the ps2 turns on,the screen works, the volume and all the buttons too but very time I turn the ps2 the light from the PMS turns red and the batteries are not low and when i connect...

Thanks Gman.

It seems that the USB-C PD is not available at store right now, does anybody know when is going to be available again