Search results

Time to spoil everyone with a full breakdown of what I did today: Idea: Preparation: Testing: Application: Polish: I've developed my custom heatsink setup a decent bit more. Aurelio saw people soldering copper heat tubes or something, so he told me to try it out with heatsinks. The...

For future readers, jeff eventually got this working. The NAND/LDO relocation can be performed without trimming, and as a general rule; if you can't make it work on an untrimmed board, trimming won't fix it.

thy will be done

no I do not

The continued support emboldens my resolve. Here's a peek at how I'm managing heat, and what makes it a bitch at the same time. I've done a lot of different experiments with Wii heatsinking. It's pretty easy to keep a 4 layer from overheating, but more challenging to keep things cool in a...

Ignore the heatsinks, I just slapped them on temporarily so the Wii wouldn't instantly overheat.

There's a lot of things under that Wii; a wifi module w/breakout board, 3x 2500mah battery cells, a GCVideo-DVI board, a bunch of wires, part of the prototype PowerMii(aka the one and only ExplodeMii). I'll probably be putting an MX chip, battery, and USB down there too. But not a second Wii...

Well I still have all 6 of the original screwposts, too. The other half of the headers will be free floating most likely, so these don't get in the way of closing the unit. Actually GPIO and I2C are on the other side. This is mostly voltage and PowerMii related stuff, and P1/P2/Reset/PWM/Sync...

Honestly you could just give this project to fibeef and he'd complete it 100%. Trust me. ( ͡° ͜ʖ ͡°)

Headers are lovely.

Everyone hears you and nobody cares. The portable is themed; not optimal - this means logic goes out the window by premise. With all your talk about logic, you're not applying it where it counts. Further discourse on the topic will result in an immediate ban. This is your last and only warning.

TRIGGERED ...unless you post a picture of the unit with my Hoenn easter egg in Fuchsia City. ( ͡° ͜ʖ ͡°)

Pro tip for all the other portablizers out there testing without USB; disable autoboot and boot to priiloader instead. You'll have instant video feedback.

( °▽°) ( °▽°) it's ok something goes there I think

remove kebab readd kebab

Well, I said I'd do a pic a day, but I've been quite busy with the new loader and some other stuff...so, instead of a look into the distant past, how about a peek at what I've been doing in the present day? The theme is "sneak in as many headers as you can." Everything needs to be below all...

So there's 3 things in that picture in the top bar: 1. The wifi status indicator (which just shows if you have wifi/nowifi, and blinks when connecting to the network) 2. The v2 indicator which stands for very bad part two 3. The PowerMii battery life indicator Also in general, BocuD, my man...

Extra picture today: For those of you who might not be super familiar with the existing video solutions; that's not a BBVideo, just a pluto board with GCVideo-DVI installed on it. I hate that I had to trim it, but it's the quickest "solution" I have.

The only release date I've ever stuck to was the romhack's and that's because I was basically doing it entirely by myself. That's not to speak ill of Aurelio or Cheese, just that between the three of us, each having important tasks that must be done individually, means it's impossible to...