Search results

I used a normal ch341, but I use the much more stable neoprogrammer program

great, the only thing I'm skeptical about is whether all new versions of openps2loader will support this new UDPBD protocol. hoping so if it increases compatibility and execution speed, the best would be an ultra-light fw that activates only this specific function in order to squeeze as little...

I removed the component you mentioned, the Wi-Fi is now disabled - not working. At first glance, consumption and heat actually seem to have decreased. I subsequently converted it to USB C + heatsink. Using another measuring instrument, the average consumption is between 200-230 mAh.

hi moahdib , Thanks for sharing your fw, just tested and some more info: -The board consumes about 200-250mA with a USB stick connected. -The modification also works with a larger chip (I only had that one, lol), but obviously from the same family and therefore compatible. In my case, it was an...

yes the boredom that the signal must be accepted by screens that support 15khz if I'm not mistaken, games like outrun 2006 that have the choice of progressive scan the image quality is exceptional

yes it's quite strange it happened the same

you could also do the reverse test by trying the board you had with another AV device without buying a new one

I noticed that unfortunately it happens when the batteries are almost at 0% probably the voltage reaches critical levels and the controller no longer works correctly... when I can I have a good gaming session but they definitely seem far superior!

it is on the ACC line and not AV, also you would not be able to solder the connector in its seat flush with the board, also it is not necessary for your problem, if you have another AV device you can confirm that the screen is working correctly

hello guys, small update after a few months. one of the two analogs died with dignity (lol) since as if on purpose I'm playing starfox adventure... there is a specific level where you have to keep the cursor inside the green bar with the left analog... with the current analog of the previous...

from the first photo you can see you have more short tracks

I've already seen this scene cit

It seemed that creating it without wires was cleaner to assemble and in terms of operation, you had many problems fortunately you managed to solve them! Great project for sure!

no problem, buy with peace of mind

thx for u reply ,actually from my side it doesn't seem like a big problem not being able to configure the gcvideo, but it's interesting to know that it could be done in the future with a new fw (I had misunderstood the gamecube dualshock - wii mote issue)

difficult to establish, it depends on the case, fans and heat sinks used. You should do some tests if you already have something yours so you can understand whether to use it or not, a thermometer with a probe could also be useful to understand what temperatures the console reaches in game after...

uh bad story at this point only Aurelio can save us, or we should try the 2.4v but I don't think it unlocks this function...

yes I meant with the GC+2.0, so with a normal wii and a "normal" dualshock gamecube and the fw "gcvideo-dvi-shuriken-v3-wii-3.1-spirom-complete.bin" does it work? because I understood that this fw accepts commands from the wii motion and not from the gamecube port, if so it means that the...

I also used ch134a with neoprogrammer which worked perfectly, the fw for the wii version should be modified so that it works with the gamecube controller commands nop u need the 5v for a picture ,to give you an idea, I can't tell you about the power, a fast test gave me about 7 minutes less...

I remember for sure that the cell balancing was non-existent (beyond specifications) and it also got too hot if I'm not mistaken