Search results

I'd say video game OSTs as well eg Galaxy is great, pretty much anything that's in smash as well specifically the metal parts of the Xenoblade 1 OST are amazing

I’m talking about my last wiip, the 2nd swiitch. It was thinner then the stock wii u gamepad with its stacks of boards and all its problems. All walls were 3mm which is a lot thicker then those of the wii u gamepad iirc, tho i might be wrong there. The one with the single PCB will be even...

Uuh, my portable (swiitch v2) doesnt even use a heatpipe setup or anything and its thinner then the Wii U at its thinnest part, so i’m sure its not that hard lol. Yes i just measured it, its about a millimeter thinner. Especially when using a cooling setup like perdue89 and if you put batteries...

I would get the 6.2" screen in the BOM and use flat lipos in combination with a cooling technique similar to how Perdue89 did his littleBIG Boy. The screen has VGA iirc as does the wii with Aurelio's mods. Reusing the Wii U gamepad panel would require a custom lcd driver and unless you have some...

kek at this point I'd just start your own thread... oh well. Those boards are designed for 4 regs, but have a line in the middle where you can cut them. Placement is a little easier like that so I sliced it in half. And yeah when it comes to PCB design I'd say go with eagle (unless you have a...

I designed those a while ago to save space and simplify regulator wiring. If you want, i should have some left you can have for shipping. Should be about 7$ i think to the us.

y Is it literally all bullshit? As far as i know it should be basic but accurate..

Hey, To begin, if I'm stating something incorrectly, please correct me. I'm trying to explain this all with what I know, but my knowledge on this concept is limited to I might mess something up. Writing an emulator doesn't really work like this. "chips" (processors / ics I guess would be more...

Well this one has a bunch of unnecessary plastic under it, which won't be there in SMD form anyways I replaced it already and it all fits now (yeah ik the USB port has been moved but that's cuz it was the only thick ish component still there, so now everything is even thinner (21mm)

Thats not the USB port I'm using in the final thing. This one is THT so thicc, the final one is SMD and does fit :3 lol finding non QFN regs and the fact that the PTH regs are just too thick for this build..

So, over the past few days I've been redoing most of the PCB design and incorporating these new smaller, thinner and also more efficient regulators into my board. The most important thing really is their thickness, as the inductor is now the tallest part at ~5mm above the board. The PTHs came in...

No, they are actually quite a bit more efficient, but because they are so much smaller they will get about as hot. The PTH regs reach a maximum of 85% at 1.2V, even lower at 1V. The TLV regs reach 89% at 1V 1.5A (5V input), and 85% at 12V inputs. The TPS regs I'm using are even more efficient...

Actually the TPS series isn't just boost converters. There is a very similar TPS reg almost exactly like the TLV62130X series in feature set and function, but in SOIC form. I'm currently working on changing my design to incorporate those regulators instead as they are very thin and allow me to...

I thought about using them but already had 3ds sticks, models and ffc connectors ready so didnt feel like it. If i dont like the 3ds sliders in a prototype i’ll definetly switch to switch (lol) sticks instead. We’ve talked about this in the discord. If i absolutely need the space i’ll switch to...

Hey all, as some of y’all may know through the discord, i’ve been working on a new portable for the past few months. This new portable is going to be mostly based on my previous one, as it felt very nice and i liked it a lot when it comes to shape / feel. The outer case is going to be the same...

Try starting emunand and manually setting the video mode to 480p in settings. That should fix it. The lower image quality is probably because you’re not using shielded wire; Try replacecing your RGB lines with some form of coaxial wire, like the Wii’s wifi antennas. Connect the shielding to gnd...

There will probably be PowerMii Lite boards in the store once that relaunches, I'd say in about a month or so. I'd wait for that, or PM noah to ask him.

The easiest solution is probably just buying one of them eBay stick converters, and they wiring the GC stick to it. It should just be a normal potentiometer based stick so replacing it will work fine.

If I was you I'd just wait a week or two, as the store will (apparently) relaunch soon. Otherwise you could always make one yourself, its not that hard or expensive anyways :P

It looks great really! I wish there were more gamecube portables lol, I mean yeah Wiis are superior and all but still I find the gamecube super charming.. This entire portable in general, no super new custom pcb memes, all frank encasing, its how it all used to be. Cant wait to see it finished!