Search results

For future reference (or if anyone is googling), any revision disk drive will plug in and work correctly with any other revision (excluding the wii mini).

Try holding reset to ground to get into the priiloader interface. That should give you the option to boot the homebrew channel so you can try reinstalling bbloader. Also, if you still have issues, post pictures of the problem if you can

I can't give an update on future shipments of kits, however I can tell you it ships from Michigan, USA. You can get notified about future restocks in the Discord.

In theory the board would be able to be trimmed very similarly to a 4 layer, however the orientation of some of the components would make the outline a bit larger. We generally don't recommend trying much with wii minis just due to their higher rarity compared to any other kind of wii.

I have KVM set up with hardware passthrough for my VR setup, it works surprisingly well as long as you set it up correctly :P You'll probably want to look into the level1techs stuff on vfio passthrough, they have a ton of great resources on how to get everything set up. You'll probably also...

Sounds like you need to resolder the U10. It may also just be broken (U10), when you're shorting the 3.3v and output pads, that's essentially doing what the U10 is supposed to do in the system normally. Do a quick check to make sure that ground is on the blob on the bottom.

This is just if you've cut your wii board already or not. If you have not disassembled the Wii it would be untrimmed.

I love the headers you put on there, that has to make assembly/testing much easier :P

Send a DM to either @Noah or @Gman and they should be able to get you sorted out.

Have you checked all the voltage lines in another spot that is connected on the board? Also, you have the jumper pack and a game in when you're trying to get video, correct?

Could you upload pictures of the board?

Yes, hold the reset button while turning the wii on, this will bring you to the priiloader menu. Go down to the settings, and change autoboot to the system menu and hit save. If you installed the nowifi ioses, you'll have to reinstall the stock ioses with something like MMM (which you can get...

Changed

This is missing the last digit in the box (that is part of the serial number)

Could you double check, it looks like there may be a short on U7 on the left side, though that shouldn't prevent you from programming the board... I'll have to look through the documentation to see if I can find something else soon.

If you have some room you may be able to dremel out a slot for the ribbon cable. Good luck either way :D

Did you make sure to plug the charger in momentarily and then hold the power button to turn it on?

Click his name, and then click "start conversation"

You uh, already asked this? https://bitbuilt.net/forums/index.php?threads/need-some-help-with-portablizemii.3602/ Anyway, a more complete list is here https://bitbuilt.net/forums/index.php?threads/portablizemii-compatible-usb-drives.2608/