Search results

Dump them before you trim the Wii. We don't support piracy. If you connect the usb c port while the portable is turned off and it will appear as a usb stick. IIRC you can even connect it to Wii and dump it instantly onto the Portable.

The recommended speakers are SP-1511L. You can pretty much get them everywhere.

If you have canned air or WD40 try spraying it under the chips, BUT I am not sure if it will help as I am not as experienced as others. For creating threads: 1. Go here 2.

Did you have the Cpu and Gpu covered in tape to prevent metaldust getting under them? If not that might be your problem. Also please create your own thread instead of using someones else.

The folders have to be on the root fo your drive, not in an own folder.

Its analog. The wii doesn't have any kind of digital output.

Use the thinnest tip you have at around 400°C. Tin your magnet wire and then it pretty much just sticks to the pin. I also recommend to wire hsync from the side and vsync from the top so you don't accidently remove one while wiring the other one.

Press 1 when you're hovering above the game and enable WiFi

What USB drive are you using and how is it formatted? This is likely an issue with it.

How many amps can I pull from the 5V line on the stock regulators? Board is untrimmed and I need to connect a 10inch screen and an 6w max amplifier. I don't know how I missed of before but the maximum output current is only 1A, which won't be enough for what I need. I'll look into other...

Do they get just warm or is it really hot that you can't touch it for a second. Had a Wii that got crazy hot and didn't boot.

Did you tape the chips with something so no metal dust gets in? If yes this could just be an unlucky trim. I had the same problem with 3.3v being like 0.6 ohm. Apperently I raged when I couldn't fix it and sanded the entire AVE. I now have a non working trim that is missing a AVE. I can't...

The PMS is needed but currently out of stock. Every few weeks or so the PMS-Lite gets restocked so I would recommend to keep looking at the 4Layertech site about 2 times a day to check it.

Looks okay to me but I would recommend to check if anything is shorted. S and DL may be touching from what I can see

uhm I think you pressed the wrong letter there

What did you use to trim it looks very unclean, when I trimmed a wii the trimming lines were mostly straight. Maybe you speed was too low. but I dont know much everything else looks fine.

Also VGA ca be quiet buggy on the vanilla menu. Some Wii can be used with VGA on the menu and some can't. IIRC some tried to find out why it happens but didn't find the reason

Yes if you are able to wire it then do it, only way to safe this now

Did you try to use 5v directly at the barrel? Some support that.