Search results

Press 1 when hovering over the game and enable bluetooth

There is another guide for 6 Layers, but its not recommended since their power draw is so high.

1. IIRC you can connect the normal 3.3v to the 3.3v standby for an automatic boot. 2. You can pretty much make your own controller with a GC+ I can't anwser your third question. 4. You can connect a switch to remove 3.3v from mode so you can connect composite, but a Wii2HDMI will not work as...

Pretty sure it has a pinout at the bottom of the pcb

Also a tip: When removing the caps dont desolder them but rather twist them. It puts less force on them and reduces the chance of ripping them like they look in the picture.

The U10 wire does not seem soldered at all. Also remove any components that you've sanded through because they might be shorting.

Could you post a pic of the back?

I think that the Wifi wires might be a bit too long. Did you patch out Wifi during install? You can still activate it on a game to game basis. To me it sound either like a Wifi or u10 problem

Keep it. There is nothing wrong with it and you can build a Noldendo Micro

You've seen the OMEGA Trim, now get ready for the Funky Trim

Please don't double/tripple post. Instead edit them. If you relocate the BT module, it'll allow you to connect Wiimotes. Can you tell me exactly what you mean with the second question?

Then you might be interested in building something like a Wii laptop. You won't achieve anything small while using the stock regs so trimming would be just a waste of time. If you find a old car TV you could use it like I did This currently runs of wall power but its just the prototype. Don't...

It might be possible but it is not recommended as their efficiency is really bad.

The LDO creates about half a watt of heat. You're losing like 10-15min of battery life IIRC.

Its less than an amp. If your regulator can safely output 750mA it should be fine

Pth regulators are pretty much your only easy option

I don't think they'll be back soon. Did you remove the LDO or why not use the PMS-Lite

I didn't have a problem with that

https://bitbuilt.net/forums/index.php?threads/restoring-wifi-functionality.390/

Im no expert on this stuff but I had looked into it and found some stuff. I would go with removing the inductors and injecting the voltage there or inject the voltage on the test points on the back.