Search results

I never really understood that

Starting from left to right, there are 18 connections on controller yet there's only 17 solder pad. The 8th has no solder pad (color orange) and i don't even know why. 1) R2 2) R1 3) Triangle 4) Circle 5) X 6) Square I don't know the 7 to 11 (red, orange, violet, brown, orange) 12)...

Will it be fine if I use this controller? If so, how will I wire it? Need help specially on the Ground part

Finally! The difference between Composite & VGA Idk which is wrong between the PS2 guide for H/V or the label on the motherboard of the screen. I almost gave up hope for VGA on my screen when it occur a random thought in my mind to switch wire the H & V then my screen which is in VGA mode...

does that mean that the time you discovered the H/V from the ps2 motherboard, you never used the vga converter again?

your portable reminds me of @darkwing 's 1st portable back in 2013

Need your help. I'm using the rubber tact switch. Idk why can't I press the ← , ↑ , △ , ☐

I got the PS3/Wii VGA cable today and tore it apart to get the LMH1251 So from the PS2 motherboard, I connect the PS2: S-Video Y ---> LMH1251: Y PS2: RGB ---> Screen: RGB LMH1251: H & V ---> Screen: H & V PS2: Video Ground ---> Screen: Ground It doesn't work for me which means no output...

dude, no pics :\

http://modretro.com/xen/index.php?threads/ps2-beginner-guide-getting-a-7900x-board-ready-to-wire-up.12562/ also, make a worklog

try to use a multitester to test each fuse at teh back of the ps2 motherboard. Replace it if you found shorts.

that logo is siiiiccckkkkk!

Now try the H & V wiring coming from the PS2 Motherboard

Good News I made VGA appear twice by poking the two holes based on the picture above, sadly, on the third time, it didn't happen anymore.

does it mean that you have tried the LM1881N method on your screen and it doesn't work for you? which means as in totally no video output? or is it just like mine that keeps on blinking?

I'm not sure but it's a 79002

Yes there's two capacitor. Have you seen the two video that I post above? I was wondering why it keeps on blinking Could it be maybe it's because the screen needs 31khz while the PS2 only outputs 15.1 khz on Horizontal sync?

i just followed this but instead of 10V electrolytic capacitor, I used 16V electrolytic capacitor because there's no stock of 10v here in electronics stores. Will that affect it?

Based on this diagram that @Lightning found, the HSYNC & VSYNC is on the top left of this picture and HSYNCO & VSYNCO is on the bottom right. which is actually H is the orange V is the red I talk to @Luigid before, he told me that VGA worked for him in his 5.6 dalian screen when he get...

I believe that's not Gman's screen. His GS2 has HDMI port, while the screen that you link has no HDMI port.