Search results

Going to be honest, I would stay away from that station. If you want a nice soldering Iron go on ebay and Look for a Metcal SP200. You can get the station for 50 bucks or so. Then pick up a wand for 40 bucks, and tips you can find used on ebay for 10 bucks or new about 20. I know it is more...

All right Thanks guys, I just want to make sure I do this one properly. I done the gamecube cut and had zero issues, everyone said the Wii was easier, but it sure as heck has not been easy for me for some reason. Thanks

all right, new board is here, been flashed and is taped up. got one question just to make sure. On the U10 move where you need to cut the top right trace. In the pic is shows the pad on bottom right gone also. is that needed? picture attached.

@Aurelio is more then welcome to them, I still have the boards where i cut these out of, As long as he will pay shipping i'll send them off to him. So @Aurelio contact me if you want this stuff. Thanks

here are pics of board 2, that i cut months ago without flashing

is that fixable? if I can find out what is causing the short? Also I have another board I cut a long time ago, but I did not flash it before I cut it, is that possible to fix? or just move on to another Wii?

here are some pics of the board right now, have i gone to far in on the cut now?

the 1.15V line is now shorted to ground also. This is crazy I have even ran my USP cam over the edge and don't see anything.

i have been sanding on this thing for an hour and a half, and still shorted to ground on the 3.3 line. I am right at the max i can sand in now. how much past the line can I go?

ok, i'll check for short to ground, and i'll sand it some more. Can you guys tell me if this item in the bottom right corner, I have it circled in Red. Is that Item needed, or can i take it off?

I sanded the hell out of it, I left like a quarter of an inch after the cut, then sanded it down close to final size, then used sanding stones like these to dress the edge

Hello, I have got the Wii cut, and the regulators built. When I power on the screen and the Wii nothing happens. I have checked voltage and 1.15 reg is good, and 1v reg is good, however the 3.3V line shows .5mv. If I take the 3.3 volt line off and check it it's putting out 3.3V, Not...

ok got it to work in Firefox, the one browser I did not try. Order placed thanks guys.

here is the error i get

Still not working, unable to register for an acct. or do it as a quest. keeps asking for "State" and it will not fill in. @ShockSlayer can I just paypal you the money for this? i need this item to start to finish up my units. thanks

do we got any idea when this will be fixed? so i can place an order? still doing the same thing it was doing last night.

Okay, I'll wait for it to get fixed then try to order. Thanks

I got it to add to the cart, but now it will not let me check a "State" to ship it to

I see the boards in the store, but I am not able to purchase it, i get a popup window. what do I have to do, to get this ordered now.

what is the 3.3v standby reg. is their a number for it? Thanks