Search results

ps2 advanced trim model: https://bitbuilt.net/forums/index.php?threads/ps2-parts.3905/

oh crap i misread that and i thought they didn’t have pm installed my bad edit: doug dimmadome? nice

you must install bbloader before trimming. unless you want to go through the hassle of perfectly relocating the bluetooth and wifi module, install bbloader!!!!

DSii

double post because i think i figured out drag soldering, so i might attempt a lmaov2 in the future!

so when i was about 9 years old, i became obsessed with building robots. so, i bought the cheapest firestick, solder, and arduino nano clone i could find and i started building. this year when i discovered bitbuilt, i realized that the tools i bought were terrible, so i got a decent iron, some...

great work benge, the portable looks amazing and the video is great as well! i can’t wait to see what you’re making next.

for your question about the gc+ 2.0 configurator, you can find it here for vga, it clearly says in the manual: Using the twisted 34 AWG magnet wire we used to wire the USB lines, we will be wiring VGA to the LCD driver board. Twist and cut 4 lengths of magnet wire. they are alternate...

please read the post above yours

rip oreo’s balls

it’s typically best practice to just do it in your garage/outside

i don’t think there’s plans of this being supported for vWii

:rothink:

not sure what you mean about a 7” touchscreen, but i found this on adafruit: https://www.adafruit.com/product/2354 you can use it with the hdmi driver board: https://www.adafruit.com/product/2219?gclid=EAIaIQobChMI3rf2_IaG7QIVkRx9Ch1dsgU_EAQYAiABEgJMx_D_BwE

the usb ports can be relocated as long as the data and power lines are connected to their old locations on the motherboard. the data lines should be twisted together tightly to avoid interference. as for your usb c power solution, it should work if you remove the stock power jack and rewire the...

aside from the guides, you should also read through the gboy manual and many work logs as they typically have very useful information

if you didn’t damage the u9 or u5 pads then it shouldn’t be a problem

it uses the wii’s digital video output from the gpu to directly run an lcd screen without a driver board

are there plans to add the 3.5” ips to the store?

thank god gman suggested magnet wire for the cartridge slot connections, those look like a nightmare to wire