Search results

Great. So either of these 2 then? I used this one for the buttons, which has the Superpad name, but the analogue stick was like an official controller.

Thanks for the info. You wouldn't happen to have a picture of the Superpad chopped down would you? I'm curious how small you were able to get it as your portable looks tiny. Also, if anyone can give feedback on my practice board chop, pictured on the previous page, I'd appreciate it. Are there...

I did some work on the front, adding the B, A, C buttons. I've also some some work to smooth oit the front. The parts I'd ABS welded had bowed a bit, so I've built up the concave sections to give a uniform look all over.

Thanks. I just read some reviewers on Amazon saying the later ones are better. So I'll give it a go. The Hong Kong seller got back to me and they don't ship to mainland China, so I'll have to see what I can do there.

Is there any sort of mod that could be done to it to lower the sensitivity. Playability of Goldeneye is a pretty big deal for me.

Excellent! That's what I have. I'll have to wait to be able to order the joystick, but thanks for the info!

I've seen the tutorials by Bacteria on Youtube where he uses a dual shock stick for his portable. There is no mention of any additional components needed to get it working. Is this because he used a Superpad64 instead of the official controller? It looks to have pots on the sides. Edit: I...

I'll see if I can have a rethink and create some more space for airflow. Thanks for the feedback. Cheers for the info. What a pain that they're not directly compatible. Could I avoid more headache by using a Ps3 DS3? I have a spare controller I could sacrifice.

Thanks for the link! Am I correct in thinking that you run a wire from each pin (corresponding to a button) to a tac switch, and one wire from ground to all of the tac swiches? Also, what are the full values for the resistors, as long as they say 1m and 560k will they work? I want to use the...

I only have one shell. Unfortunately, living in China, the only places I could find them sell them in bulk, so I had to get mine sent fromt he US. Same with some resistors and capacitors I needed. the only way to get them in small amounts was to get them imported. Nice work! I've gone for a...

Presently I still have all 10, but I haven't tried to get everything in there yet. I am a bit conerned about how much space I have to work with. I went from a 5 to 5.6 inch screen. Fitting the driver board as well as the screen and the N64 motherboard will be a challenge.

Got the new N64 in the post so I'm back in business. While I was waiting I got the front of the case all smoothed out with a lot of sanding and priming. I added in the letter C between the C buttons from an official controller. The C buttons are from a non official controller. I combined...

Cheers. Yeah the case could do with being a bit thicker. I'm going to have to extend out the back to make it all fit. Many thanks, I'm pretty happy with how it's going since it's my first go with ABS slurry and car filler. Still no signs of life today so I have another N64 ordered.

The screen is 5.6" At056tn53 V.1, kyvn2v1. The 3.3v is supplied with a step down regulator made with a pth08080 and a 1.8k resistor. It's not working without the battery now. It was fine before I tried to relocate the power. When it didn't work I romoved all the wires and used the power...

Hi, after a long wait, I finially got the last of the components and case I needed to start my portable. I'm going for a Wii-U controller as the base. I've made some progress but hit a bit of a snag. Case modding is going alright: And I had N64 and the monitor working off batteries...

I've not got any other device capable of 480i over vga right now, so I'll have to wait until I have all of my components here and just give it a go. If it doesn't work then I'll grab the driver board you mentioned. Thanks for the assistance.

I believe it's a UT-MD07080. V.3. The only number on the listing is AT050TN22 V.1, but in hand, the board has the UT number printed on it. You'll have to forgivve me, I bought it from taobao, so the listing is in Chinese.

I also found some mention of this here: http://bitfixgaming.boards.net/thread/332/n64-snes-rgb-confusing Regarding the LM1881N it says "that will get your sync, but then its only 480i 15khz". Does anyone know if the ZJ050NA-08C will accept this as an input?

Looks like ultraVGA is out of the question right now. I did some googling and found the LM1881N mentioned in a few places. The second pinout doesn't have a hsync out on it.Any idea which of the 2 is correct?

I've slowly been putting together all of the resources I need for my portable. I have some last bits I'm waiting for from the US, so I can get things moving soon. I was wondering if anyone has info on connecting to a ZJ050NA-08C via RGB? The screen has composite and VGA. If I connect to the RGB...