Search results

Hello, don't put the air conditionner, the n64 is definitively better, it will also save space! I hope your BMS is good, in the listing they said that they can do it for various type of batteries, so maybe it is a hard to see change in the electronics. I understand more if it is for a RV, I'm...

That's a nice project. It is sad that it won't work out. I wonder why you would need a 1800w air conditionner for a car, it seems a bit to much.

Hi, you picked my curiosity with your question regarding the LR button, and I wounder how yours feel like?

Thank you! It is an Eyoyo screen, those are amazing, however it is not used that much since the controller board is quite tick/wide. https://www.aliexpress.com/item/4000353552752.html?spm=a2g0s.9042311.0.0.27424c4dpsgpki The LR feel quite good, but the click need more force to press than the...

Really nice wii, it is really thin and well-thought. For the issue with gamecubes games, I guess the issue is that you have an PAL version of the rom and the progressive mode only works with NTSC roms.

Hi, I don't know for sure but when a pad came off, it is because you don't heat it enough and pull it before the solder is fully liquefied. So it would be a lack of heat more than to much. You may be able to trace where the right audio channel on the board and solder a magnet wire to it. If you...

Consalizing is cool, but in the end it will just feel the same as playing it on an emulator, while getting an ips screen keep the original controles but it is night and day in term of screen quality. In the end what matter most, is, if you play with it, which way you will do it.

I do not think it is really worth trying to mod the case more than adding the usb C/Hdmi port, especially since the thickness of the case is limited by the size of the heatsink. Design a 3d printed design would be easier. But it is up to you.

You can look on the wii trimming guide, there are legend for the connexions. In the wii miicro guide it is said that you need the 12v for the wii2hdmi, so I guess that you would at least need composite ground and 12V.

I saw someone adding a wii2hdmi without taking out the original port, I guess there is enough space in the wii shell.

If you want to build a noldendo you won't need to relocate the USB port as they are availlable. The easier way to fit the wii2hdmi would be to use a smaller cooling solution and put the wii2hdmi board on top. You could also remove the original port and put the wii2hdmi in place, but I guess it...

Yes that's what I mean. If you want to learn about it there is a tutorial there. Solid State Relay tutorial The breakout board should have 5 pins, (the midle pin is the click).

So, in the pdf it is stated that you need to have a voltage difference of at least 1.4V between the 2 control pin to have the 2 load pins connected. https://eu.mouser.com/datasheet/2/240/CPC1035N-1546128.pdf

Hello, This is my second wii portable, which was a frankencase, I bought a 3D printer and tried to learn how to design. It is a quite simple, but I like it. Features: Wii PMS, U-Amp, usb-c breakout board, 7" Eyoyo ips vga display, 6x3400mAh removable batteries ~75Wh, so, 6-7 hours battery...

Well, then you could use a mosfet relay, it would be easier, sorry to not have think of it. Something like this one, you would need 5V however. There are also ones working out of 3.3V since it's the other standard voltage...

Hello, I don't know if I understood correctly, but first of all, do not measure the resistance between 2 point while powered. It have to put some power in to measure the resistance, so my guess is that maybe you are triggering things with that power. I don't really see the need for an array...

Hello, I don't own a GBoy, but I guess they are gum pad with graphite inside. I once had this problem while ordering a knock off shell for a gba, if you have conductive tape it may work.

Wou will see, a copper would help with the cooling, but, most importantly, the mounting process. I would advice buying one and cut it with a dremmel. You can find one easily on ebay. Also, since you are building a GWii, keep in mind that it is quite tight with the battery up top, so I don't...

Hello, thank you for the guide and the files! This is my take on it:

Hello, if you look at the compendium, there is the spot where you cut the 1v15 plane. There may be other places, but it looks like this is a voltage used for the CPU. I could give you some more thing to try but I don't think it is really safe, so you should wait for better advice.