Search results

Any image manipulation software. I used GIMP but theres also paint.net and Inkscape people like to use.

Remove !isWiiU() from this line Change this entire section to: PAD_ScanPads(); for(i = 0; i < PAD_CHANMAX; ++i) { PAD_Pressed |= PAD_ButtonsDown(i) | PAD_ButtonsHeld(i); PAD_Stick_Y |= PAD_StickY(i); PAD_Stick_X |= PAD_StickX(i)...

I did at one point. No idea if i still have the build though.

HYPE

I can bring a few Wii/U trims and some stock boards to show off The only project I have that I could show off at this moment is my Wii U Mini, but that could change. For projects that arent mine that I could bring: a Kawaii, a gc nano, a wii micro i uh, dont have any portables. hopefully...

No. That pin is used for the second bank on a dual-bank NAND, but the Wii uses a single bank chip. The only time I could think of where you would use that pin on a console NAND is to reflash the Wii U SLC.

Nothing. You can have none of the modules / disc drive attached and it will show a blue LED and a picture on the TV. If its blinking red with none of these attached there's an issue elsewhere on the board.

theres 3 (that I know of) for the wiiu. the 37 drive board is found in most(?) WUP-40s and all WUP-50s.

Where do I even start.. (probably with apologizing for forgetting the circle trim) This is my first and definitely not the last MGC I will be attending! I had a blast and everyone was so kind to my friend (who's not very active in the community) and I (who is always a nervous wreck for pretty...

No

As the title suggests, I'm trying to collect serial numbers and what board has a given range of serial numbers (like what was done with the Wii eons ago). I made a Google form for that to hopefully make things "easier". The link to that is here. Thanks in advance to anyone who submits their...

I got bored and made another lol \ A few differences from my original one: - 6L-NANDFlex!! - deadbugged AVEFlex (maybe someday ill actually commit to design for 6L but for now this is fine) - R70 relocated (instead of nuked) - U10 is using the "standard" U5 footprint relocation - CPU passives...

fuck yeah i've been needing this that one only supports the complete SBC Pis, not any of the picos.

Didn't think I would ever actually build one, and then I got the last black shell. My wallet is crying (should have seen it coming) but I am joyous at the masterpiece! Thanks Yveltal for the group buy, and thanks Ding for making the shells in the first place! GOATs

The DEBUG port on the Wii actually gives quite good indicators as to what is happening on the Starlet, as boot0, boot1, and boot2/IOS all output to it and it can be used to verify how far a system gets in the boot process if there's no video on screen for whatever reason. Via pictures are...

Wii Variant: Mini - RVO-01 Serial Number: HW200763972 Hollywood Datecode: 1307 (7th week of 2013) Board Datecode: 13273 (Some time in 2013) Pics: Wii Variant: Mini - RVO-10 Serial Number: HW204044275 Hollywood Datecode: 1328 (28th week of 2013) Board Datecode: 14133 (Some time in 2014) Pics...

I dont have any scans with the soldermask or components removed, but i do have scans of them still in place. i was going to get copper scans but i wasnt very careful with the hot air and the copper started to delayer, i think.

Aaaaaand there goes the need to relocate the WiFi! Thanks to @GaryOderNichts, we now have a patch that removes the need for the WiFi module! It took a bit of effort to find the root problem, but it's just a two-liner ASM patch: In my testing, you can use the WiFi module with this patch, but...

The docs folder had been linked earlier in the thread, but ill link it here too: https://drive.google.com/drive/folders/1T8iTm93AhAHYFhyDN9PrxH_x5npnDAZo?usp=sharing BitBuilt Mirror

Yes