Search results

What do you mean when you say you rearranged some stuff? Have you tried clicking on the option System Menu in priiloader? If your Wii still doesnt boot, then it seems like you have managed to stub your system menu IOS, you propably need to reinstall it, download it with this...

Even if you have a pms 2, you dont have to remove the 1.8v regulator, you can just not connect it to the pms 2 BUT if you have a pms 2 lite you need to keep it AND connect it to the pms lite, as it needs it as a reference voltage afaik. Also, the wii needs atleast 2 18650s in parallel to stay...

Mouser does have the audio jack in stock: Here Also the capacitor should be fine, the sizes are standardized so an 0805 capacitor will always match another 0805 capacitor. Height shouldnt really matter in this case. From the specs it seems that the capacitor is indeed almost the same, except...

They *should* be able to run from usb, you just have to configure the hbc to launch usb homebrews and set the file Location to usb in yawm modmii edition

BE WARNED! I DO NOT GUARANTEE THIS WILL WORK AND WONT TAKE RESPONSIBILITY IF IT BRICKS YOUR WII!!!! Im sending you a pm because the stuff you need to region change is copyrighted by nintendo afaik so I cant really post it on the main forum. NOTE: I do not know whether or not this will work on...

Trim looks good, but make sure to check the resistances of the different voltages to ground and each other, there is a pinned post here detailing the different known good resistances. Also make sure to use the correct multimeter lead for the correct test point, i.e. if it says to put your gnd...

Its kind of complicated so I cant really explain it right now, I will write sth when I get back from work. Be warned though that it can very well go wrong and brick your wii.

Looks really good!

https://wiibrew.org/wiki/Error_003 Your mainboard apparently isnt from japan, but from Korea, which is why it contains the korean key. Use this to uninstall it: https://wiibrew.org/wiki/KoreanKii (Alternative link) https://wiidatabase.de/downloads/hacks/koreankii/ It should work fine...

Post pictures, what kind of audio setup are you using etc.

Damn this looks good

If you are certain that your wii is outputting something, it could be sdcard corruption. Try taking the sandisk out and reformatting it or switching brands. Also reflow your usb data lines. They look alright but it cant hurt.

Best bet are gonna be sites like aliexpress or even ebay if you can find it there. But first look if buydisplay.com has the display you are looking for.

Im not really sure if those games implement it, but it could be something to do with the progressive scan and some games not being able to support it. According to the nintendont compatibility list, hitman 2 silent assasin ntsc hasnt been tested with 480p output so there might be an issue. I...

Fan selection shouldnt really matter, just get one thats the size you want with an additional beefy heatsink and you should be good, I mean just take a look at the factory cooling solution.

Yeah I know that its more of a hassle to assemble it on your own but I dont mind it if I can save some money. Im currently in the concept stages for my second portable which im trying to make as small as possible because my first one was quite big and I can already emulate Wii games on my phone...

Thanks so much for your detailed reply, I was also thinking about maybe doing a whole ass reimplementation of DD but I know nothing about fpga programming so im glad that a low cost solution is in development. It has been some time since I was active on the forums and I dont really use discord...

So the Wii Direct Drive is pretty darn expensive and I dont really see any quality benefits in comparison to the FujiFlex and HDMI driver board combo. The problem with that however is that the driver boards are big, bulky and unneccessary and mostly use rtd2660 chips or derivatives which are...

It seems as though you are directly powering the pms with your lab bench psu instead of connecting batteries to the pms. I have had problems occur because of that before and have been advised to not do that as the pms wont function as intenden like that, propably has something to do with the BQ...

I found it best to learn by watching various youtubers videos, Electroboom is nice because hes also entertaining and you will quickly learn what not to do, Eevblog goes more in depth into the topics and also has longer videos but is also entertaining, phils lab has a nice series of kicad and...