Jason59430

Better than 1 of the wifi vias.

It’s good, I managed to solder the MX chip and my RTC battery the first time , the internal walls of the Via were well intact, I...

I'm afraid if you ripped up the entire accessible part of the via, then there isn't anything you can do. The other side of that via is...

I still have a pewter ball soldered inside the via, it stays well in place and I believe that a small part of the Via’s ring has...

I will try and come back to say if it works, thank you for your help in any case

Well if you're going to get it working at all, this is your best bet. I'm hoping that the damaged area is just on top, because otherwise...

You can just scrape the trace of data line 14 with an xacto knife or something similar, being careful not to scrape any ground or other...

Hello, I’m a little annoyed. I wanted to move my MX chip, but the connection corresponding to data line 14 is torn from my Wii. Is there...

Bonjour, je suis un peu embêté. Je voulais déplacer ma puce MX, mais la connexion correspondante à la ligne de données 14 est arrachée...