Worklog WiiBoy rev3

Discussion in 'Wii' started by Gman, Jan 30, 2019.

  1. GingerOfOz no wario Staff Member . .

    Joined:
    Dec 16, 2016
    Messages:
    899
    Likes Received:
    1,994
    Location:
    The Oregon Wildlands
    Portables:
    3
    That particular tact was only available on a couple of European sites. We bought the entire stock of these tacts that were available, and are working on getting them ready to sell on the BitBuilt store.
     
  2. xsping .

    Joined:
    Dec 9, 2018
    Messages:
    91
    Likes Received:
    24
    it is rarely impossible for me to buy those tact from bitbuilt store because of the shipment, so can you give me the model number of this tact switch? maybe i can find it on chinese webstore
     
  3. Aurelio The Fixer ᕕ( ᐛ )ᕗ Staff Member . . . . .

    Joined:
    Mar 3, 2016
    Messages:
    1,789
    Likes Received:
    2,441
    Portables:
    2
    https://en.maritex.com.pl/product/show/44634.html
    They are these ones. If you find them elsewhere please let me know (even though I am the one who bought the entire stock lol)
     
  4. PanPeople .

    Joined:
    May 6, 2019
    Messages:
    37
    Likes Received:
    1
    @Gman what kind of screen have you used?
     
  5. Gman RTFDS Staff Member . . . . .

    Joined:
    Feb 25, 2016
    Messages:
    889
    Likes Received:
    1,946
    It's a 240p VGA 3.5" lcd generic module found on aliexpress and ebay
     
  6. xsping .

    Joined:
    Dec 9, 2018
    Messages:
    91
    Likes Received:
    24
    tons of thanks for you, if i find any, i will tell you. but i have a question :is "c,c " pin of this tact switch internal connected or not ? i think it shoud be internal disconnected
     

    Attached Files:

    Last edited: Dec 2, 2019 at 10:19 PM
  7. Stitches 2 and a Half Dollarydoos Staff Member . .

    Joined:
    Feb 5, 2017
    Messages:
    1,250
    Likes Received:
    1,145
    Location:
    Banana Bender Land, Australia
    Portables:
    6
    IIRC C is Common, which is shared ground. They're probably internally connected.
     
    Aurelio likes this.
  8. Aurelio The Fixer ᕕ( ᐛ )ᕗ Staff Member . . . . .

    Joined:
    Mar 3, 2016
    Messages:
    1,789
    Likes Received:
    2,441
    Portables:
    2
    Yes, this is correct. This switch connects A to C and B to C when the button is pressed (can't remember which one first, but it's in the datasheet)
     
    Stitches likes this.
  9. xsping .

    Joined:
    Dec 9, 2018
    Messages:
    91
    Likes Received:
    24
    dual tact mode of gc+ needs 3.3v ,gnd,LR,L seperately connected to this tact switch, when push down the botton,the 3.3v and gnd will be shorted?

    Remark:if two c point of this tact switch surely internally connect, chinese web store like taobao has many kinds of dual tact swithes similar with it.but i think it can not be used for gc+, 3.3v and gnd will be shorted,because two c pin internally connect,
     
    Last edited: Dec 3, 2019 at 8:02 AM
  10. Aurelio The Fixer ᕕ( ᐛ )ᕗ Staff Member . . . . .

    Joined:
    Mar 3, 2016
    Messages:
    1,789
    Likes Received:
    2,441
    Portables:
    2
    I made a custom firmware for GC+ exactly to address this. GC+2.0 will support them as well
     
    Stitches likes this.
  11. xsping .

    Joined:
    Dec 9, 2018
    Messages:
    91
    Likes Received:
    24
    Thanks so much for your reply, it means both L and LT button can function with ground? It is amazing
     
  12. Aurelio The Fixer ᕕ( ᐛ )ᕗ Staff Member . . . . .

    Joined:
    Mar 3, 2016
    Messages:
    1,789
    Likes Received:
    2,441
    Portables:
    2
    Yes. I made GC+ to behave just like an OEM controller, but the reference to 3.3V was just a firmware configuration
     
  13. xsping .

    Joined:
    Dec 9, 2018
    Messages:
    91
    Likes Received:
    24
     
  14. xsping .

    Joined:
    Dec 9, 2018
    Messages:
    91
    Likes Received:
    24
    this is nearly same type dual tact switch on taobao webstore
     

    Attached Files:

  15. Aurelio The Fixer ᕕ( ᐛ )ᕗ Staff Member . . . . .

    Joined:
    Mar 3, 2016
    Messages:
    1,789
    Likes Received:
    2,441
    Portables:
    2
    Oh damn that looks nice. I will send you the custom firmware in a bit.
    Anyways this is going too much out of topic, so let's continue this over DM
     

Share This Page

Loading...