riess
.
- Joined
- May 24, 2017
- Messages
- 14
- Likes
- 9
Great design and good to see that your making progress.
For your expansion pack, there are 2 methods that work well.
I recommend using the original expansion pack as these have 1 ram chip instead of 2 and are half the size...
Method. 1
You can remove the plastic around the pins from the expansion pack and then solder the pins on the expansion pack.
Method. 2
cut the sides and top from the expansion pack to make it a lot smaller and just plug it in.
This will not make your design thicker as this would be underneath the game card slot
this is my n64 board btw
For your expansion pack, there are 2 methods that work well.
I recommend using the original expansion pack as these have 1 ram chip instead of 2 and are half the size...
Method. 1
You can remove the plastic around the pins from the expansion pack and then solder the pins on the expansion pack.
Method. 2
cut the sides and top from the expansion pack to make it a lot smaller and just plug it in.
This will not make your design thicker as this would be underneath the game card slot
this is my n64 board btw