Solved Vga double image

[Customledmods]

Need help figuring out why I’m getting weird colors plus double image on vga any help is appreciated.

 

[Wesk]

The colour issue looks to be that your red and blue lines are switched.

 

[Customledmods]

I’ll give that a try thanks

 

[Customledmods]

Boom thank you Wesk it worked. As for the double image circled in red any clue on why that’s happening, I shielded every signal wire to ground.

 

[vipe_202]

Give swaping from composite to vga a test, I get a weird issue on one of those 5” lcds and the black driver board vga looks messed up on boot but swapping inputs cleans it up

 

[Customledmods]

Didn’t work I also get double image on av not as much as vga

 

[Wesk]

Possibly something is damaged or you may just need to reseat the ribbon.

 

[Customledmods]

Thank you guys for the help I appreciate it.

 

[Viilmo]

Those double lines are from deinterlacing the 480i signal.
I had the same lines when trying to play my pal version of Super Mario Sunshine via VGA.

 

[Customledmods]

Those double lines are from deinterlacing the 480i signal.
I had the same lines when trying to play my pal version of Super Mario Sunshine via VGA.View attachment 29121

I didn’t know that is there a fix for it ?

 

[Viilmo]

I'm don't really know much about the ps2, but if you get a 480p output it should be fine.
Is it just the menu or do games have the same issue?

 

[Customledmods]

Menu and I noticed 1 game so far sonic.

 

[Fly_5]

Did you solve the problem ? what was the failure ?

 

[Customledmods]

Did you solve the problem ? what was the failure ?

No still have that double image haven’t fully tested or reseat the ribbon cable like @Wesk suggested.

 

[Viilmo]

What screen and driverboard are you using?
It might work with another one

 

[Fly_5]

maybe an OPL or FMCB setting to adjust the resolution or image output

 

[Customledmods]

 

[Customledmods]

maybe an OPL or FMCB setting to adjust the resolution or image output

I’ve messed with settings in opl but no luck, it’s something else since I get double image in main menu.

 

[vipe_202]

Are you using a pal console? Not sure if that makes a difference with the driver board. Do you have your wires shielded like twisted pairs for rgb and composite? H/V sync shouldn’t be twisted

 

[Customledmods]

Are you using a pal console? Not sure if that makes a difference with the driver board. Do you have your wires shielded like twisted pairs for rgb and composite? H/V sync shouldn’t be twisted

Not a pal and yes wires twisted I also have h/v twisted, I’ll open it up tonight and untwist them and test again.