What's new

Question U Amp 2 Digital Audio, Digital Volume Controls

cfc_12

.
Joined
Apr 28, 2017
Messages
180
Likes
71
Location
Philippines
Portables
11
I'm trying to use the video from the PS2 converted using PS2HDMI to the HDMI of Eyoyo Screen.

It is working when you use a HDMI Cable

Then I tried using the ffc cable and connector and didn't succeed in getting the HDMI output

I also tried this, yet still, didn't get an output

175858490_510497706654954_7847949188966909840_n.jpg


This is the connection of my wire

hdmi pinout.png


Is there something wrong on what I'm doing?
 
Joined
May 24, 2018
Messages
63
Likes
83
Location
CHINA DALIAN
Hello, friend. This is made by myself. Usually, you only need to connect these lines to display them. You can refer to it. The reason why they are not displayed may also be the cause of the line. If some lines are disconnected, you'd better use a multimeter to measure which line is disconnected.Or the HDMI pins are bent and not touching.


1605142767276.jpg
1605142767268.jpg
 

cfc_12

.
Joined
Apr 28, 2017
Messages
180
Likes
71
Location
Philippines
Portables
11
I tried using Analog Audio, Digital Volume Controls and it's working fine

But when I tried into Digital Audio, Digital Volume Controls it doesn't work

Is something wrong on my wiring?

umap for ps2.png
 

Gman

RTFDS
Staff member
.
.
.
.
.
Joined
Feb 25, 2016
Messages
1,441
Likes
2,893
1635784875461.png


J3 will also be open for digital volume controls. Only bridge J0. None of the others.
 
Top